Screen's color in black and white

Hi,Yes your problem sounds like the DMD board.This is how it works: http://electronics.howstuffworks.com/dlp1.htm Basically the light of the lamp goes through a tunnel that carries a color wheel(rotating disc with a gamma of colors that creates the colors on your tv)then the light of the lamp goes through the DMD board which is a chip composed of around 2 million pixels that creates the images and colors.When it starts to fail it will create black bars,pixelation,color distortion or white dots on screens.You will need to replace the DMD board. Have a blessed one!

Horizontal deflection problem, most likely caused by bad solder on the Deflection Board

the picture tube has three color production units (bulbs) red, yellow and blue.....since these three colors can be combined to produce almost any color. as you have specified the red bulb might have damaged due to one of the following reasons.
1.continuous usage
2. keeping your tv in standby mode for a prolonged time.
the only thing you can do is call a technician and get your damaged part replaced.
remember please do not try to disassemble the unit yourself.

same problem, broke my screen, ordered a new screen off ebay and replaced it. now it works fine most of the time but sometimes external display freezes. sometimes goes black, sometimes goes multicolor pixelated (full screen, in blocks, or lines) when this happens sometimes touchpad still works, others not. removing battery usualy temporarily fixes.

can you view all programs under the start button? if so..go to acessories..system tools ...system restore..select a restore point to where you know pc was working fine, please let me know if helps

you have the cables hooked up the wrong way

hi! my sister-in-law gave me a MD853 camera last week from Canada. I used it over the weekend when we went on a trip and the pictures and videos i took were great. Last night, my daughter took a picture of me and when she took a picture of her brother, there was only white on the screen...like a moving white sheet with colored edges. I thought she destroyed it or something. I tried to use it but now the screen is all black...last night only the video worked but this morning everything is black. The other programs in the camera works so i suspect the problem must be in the lens. I'm in the Philippines and if I send it back to Canada for repairs it would just take a long time and it will be expensive to send it back. What can I do? I really love this camera... help!!!

Video format error. change pal or ntsc and try

It sounds like the circuitry which actuates the color drives for the screen are not working, this would ba analogous to adjusting for a B&W picture on a color TV you have color but the screen shows black and white. I would get a schematic for this set and measure the voltages on the color processor that connects to the screen since you know that the external jack has color. If possible I can help you troubleshoot this, if you need me to help out.

check your menu settings if not there then you may require board level service.or eprom sub menu adjustment.