Safe International Digital Electronic Safe Lockbox Gun Jewelry Lock Box Tool - Answered Questions & Fixed issues

To open your Regent digital electronic safe, you must enter the correct combination code on the keypad and then turn the handle in the direction indicated. to retract the locking bolts and open the door. If you don't have the combination or the batteries are flat, you can use a rare earth puck magnet. It is faster than using the combination. https://www.google.com/search?q=open+sentry+safe+with+magnet https://translate.google.ca/?sl=auto&tl=en&op=translate ..

Hi the moment I ON the safe button immediately error red light start flickering. So how to open the safe .

Hello, I bought the safe executive CS-2 less than a year ago, Couple of month ago started to hear beep all the time with ready led switched on, I thought it might be the batteries, I changed them but same problem, I thought maybe it needs new code, I changed it but still the same? I appreciate your feed back Thanks Mohamed

notify manufacturer or locksmith

Take the single screw off of the entry pad and remove the cover plate. Using the key that came with the safe, unlock the safe. Now, look for a little red button on the inner hinge. Push it in and you will note the yellow led on the the front of the safe turns on. Now, enter a 4 digit code of you choice. This is automatically saved and is the new 4 digit code you press to open the safe.

Hi there all I have a SURESAFE electronic security safe MODEL-OWSAFE30ES (1) To set your own code first on safe(2) locate the red reset button on the hinge end of the door.(3) Press the red button, which will illuminate the yellow light on the keypad.(4) Now key in your new code (3 to 8 digits) and press A or B to end. Note you have 30 second to complete this step.(5) Test your new code whilst the door is open. Safe will beep twice to confirm code has been entered correctly, and knob can be turned clockwise.(6) Repeat process any time you wish to change your code.,Hope this help regards rick

You must be having the manual override keys. Just open the safe with those keys and reset the passcode.

Change code to open hardline electronic safe

https://www.kgbsecurity.com.au/resources/43/flat-battery-dead-on-safe.php

I have Godrej secreto contemporary drawer ..I forgot the password...need your assistance

Seek out your local safetech.

If the safe isn't fixed to the wall or floor, then you can easily open the door in seconds. Just balance the safe on it's rear edge, tilted back about 45 degrees, so the front is about 4" off the ground. Hold the door release gently and allow the safe to fall flat, as you hear the impact, turn the release clockwise. Timing is everything and it took me 4 goes to get it right.

well need to highlight your gripe with savco this is fixya

Put the safe on your lap and bounce it on your knees and keep tying to turn the knob I had it opened in less then 10 seconds! And the batteries were dead this really does work.

Try 1,5,9. A or B

Went to amazon and found these. Entop, green battery, R6P, UM-3 Size AA 1.5V

notify locksmith or safe company for assistance

I knew someone who had a locking mailbox like that with keys when pass is forgotten or battery runs down, they could open with key. He registered it as directions said to do so you could order new keys, the old mailbox was also lockable and since owner died he had to throw it away as couldn't prove he wasn't thief. Maybe something there helps.

I know this post is months old, maybe you didn't open your safe yet or maybe someone else could use the advice.

The batteries are no inside the safe because of this reason, that you should be able to change them if they run dry.

Under the key panel is a long plastic panel. You can slide it to the right and underneath you find the battery compartment.

4 x AA batteries

have y not got the key