Dewalt Versa Clutch Tek Screw Gun DW268 - Answered Questions & Fixed issues

Hi, I suggest you should go into that supply store and ask for help, if they are decent, they will surely try to help you, they surely have some experience with that.

http://www.ereplacementparts.com/dewalt-dw255-type-drywall-screwdriver-parts-c-1009_2336_2918.html what parts?

You will take the casing off of the drill, and that will allow you access to the inner workings, such as the motor, clutch, and trigger.

If you go to the Dewalt service center online you will find an exploded view diagram of your tool, and usually an owners manual as well. Try this link:
http://www.dewaltservicenet.com/SearchResults.aspx?q=DW268
I hope this helps you to sort it out. Good luck!

The bit holder resides in the clutch housing which has a collar with a ball bearing that the notch in the bit holder snaps into. It would seem that the ball bearing has slipped out of the cooler on the clutch housing, therefore nothing is locking it into placed. If you need a diagram, let me know.

I would take this back for warranty repair, Dewalt has a one year warranty on their tools. If that is not an option get back with me on the exact model and type number and I will look into it further

here is a link copy and paste https://sawmillcreek.org/showthread.php?111567-DeWalt-733-Rollers-stopped-moving ..

It needs new blades - likely has a chip in one. See link for replacement tutorial

Red is pos and black is neg.

https://www.weeklytools.com/dewalt-angle-grinder-buying-guide/ When it comes to Angle Grinder, the name of the Dewalt tools maker comes first. We will look at the basic parts and functions of a grinder before purchasing a machine. Then let's see the details without delay.

https://www.weeklytools.com/different-uses-for-an-angle-grinder/ An angle grinder is a multifaced handheld power tools that was invented by a German company. We may don't know a lot about this tool because it is an unrecognized instrument like some other tools. Now we will discuss different Uses for angle grinder. An angle grinder is also known as a side grinder or disc grinder. It is a machine with a rotating abrasive cutting disc. Angle grinders can be powered by an electric motor, petrol engine, or compressed air. It comes in a wide variety of different sizes and powerful motor, each with the other purpose. Once anyone knows about these, he can easily find out the best angle grinder for his needs. Angle grinders are quality fulled equipment for any metal fabrication shop, and those are typically used in auto repair, workshops, and construction sites.

https://www.weeklytools.com/how-to-use-a-nail-gun-with-an-air-compressor/ We may not need a drill machine almost the whole time. But there is a demand for a pilot hole during the home finishing process. This post is not for you if you are a professional. However, in most of the cases, we observe the necessity for a pilot hole. From wooden doors and windows ...

I’m not trying to be a wise guy but the regulator has an adjustment on the bottom

The nailer must be firmly pressed against the surface you are planning to nail. This will arm the nailer in preparation for firing the nail.

Try this link: https://www.ereplacementparts.com/dewalt-dw423-type-inch-evs-random-orbit-sander-parts-c-1009_2742_2758.html

https://www.2helpu.com/PDMSDocuments/EU/Docs/Service%20Dossier/DW733-D.PDF

O rings

Either the blades are incorrectly installed causing the head to jam or the safety cover is not installed properly - there is a safety mechanism that locks the cutter head when the cover is removed.

Typical cause is low voltage - but can also be a bent driver or something jammed in the nail track. Is this a finish nailer or framing nailer?

That symptom usually indicates a low voltage issue - not sure how the adapter may affect this, I've never run them with a 20v battery. Try it with a standard 18v and see if you have the same issue - please comment back with the results, I'm curious.