20 Most Recent Fuji Rod Repair Kit - Page 3 Questions & Answers

No 2GB is the max size for XD card and CF card, You can fit type 1 and type 2 CF cards even though the cover says type 2

1. Press central "Menu/OK" button.
2. Press LEFT arrow (the one with the flower/close-up icon).
3. Press DOWN arrow (display reads "SET")
4. Press RIGHT arrow.
5. Press UP arrow until you reach "OPERATION VOLUME".
6. Select preferred loudness level.

Done.

Hi,

You can download and print the users manual in PDF format by clicking this link.

You'll require Adobe PDF Reader installed on your computer to view the manual. If it is not already installed on your computer, download it free from: http://get.adobe.com/reader/

Hope this solves your problem. Thanks for using FixYa.

I am also having this same problem. it used to work - without installing the software from the disk, but then stopped working.

I have now installed the software (on a different pc) but the camera doesnt show as a device on the windows tree.

that means that you forced some how the lens that goes out and in when zooming or turning of/on. so, check if the lens that goes out and in the camera is perfectly straigh compare to the rest of the camer. if it is the case try to force it with your hand to put it straight.

if that is not the case, it si more serious. the lens inside migh had moved or broken meaning you have to buy a new camera.

dont waste your time fixing it it will cost you the same as a new one.

It can be fixed but it will cost a lot of money Labour charge plus get a qoute and then check out the price of a new one

Replace your batteries with 2700mAh rechargeable batteries! Normal batteries it's not working for me! after i replace with Sony and Varta 2700 Ni-MH it's was working! My camera it's turn on every time!

Hi,

Kindly attach the hand strap as shown in the attached images:






Thanks for using FixYa.

my carma showin zoom error

Hi I bought this camera 2 days ago and could not download the disc for the manual . I rang fuji up to explain and they sent me a manual free of charge which i received this morning . Hope this helps !

Depending on computer, some computers will not be compatible with different software. Try finding a different driver for that particular software.

http://www.fujifilm.com/support/digital_cameras/software/firmware/s/finepix_s1000fd/index.html

Try to follow the instructions contained in this page to upgrade your camera firmware...

SD cards have a slide switch along one edge. The position farthest from the contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card. If the switch is already in the proper position, slide it fully the other way and then back again.

Go through your toner change procedure again, it could be that something is just not quite back in place correctly.

Thank you for visiting FixYa!

You can view your owners manual at the following website. It's in PDF format. If you need a PDF Reader you can download Adobe Reader for free.

If this information was helpful, please give me a big thumbs-up when you rate my answer. Thank you.
http://tiny.cc/fixya582

there's a slot in the battery compartment.

There is an internal battery back up for storing settings. It's soldered to the main board and I don't think it's a rechargeable battery judging by the amount of people who have owned these cameras who have encountered the same problem.
It's a watch type battery and these things do go flat after a few years and unless you know the type and voltage only fuji service centres can replace.
It won't affect the camera's performance it's just a pain having to set up each time you change the batteries.