20 Most Recent
Singer 2250 Tradition - Page 7 Questions & Answers
All my decorative stitches are comming out straight
it sounds like something has happened to the cam gears thatdo the decorative stitches, which means the sewing machine needsto be checked..but before you have the machine checked,, make sure all the dial that are used for decorative stitches are at the right settingone missed setting can cause a lot of problems
How do I thread a Singer Athena 2000?
The user's manual for the Singer Athena 2000 is a free download from the Singer Sewing Machine site. It will show you how to thread your machine properly. A heads-up, though--the presser foot MUST be UP when you thread ANY machine from ANY manufacturer, going back at least a century!
Zigzag for singer 306k
please get your Machine Manual on this website:- http://www.sewingmanuals.com/Sewing_Machine_Manuals/Singer.htmi hope you will find easily
How do I replace the slide plate on a singer 6234
1st. remove the foot from the machine to give you working room.
2nd. get the long plate "throat plate" look at the under side, you will see 1 side the slide part crimp shut, this is the side that will be the front.
3rd. put the plate in place as it should be, then push it up thill it clear the metal clamp.
4th. use a screwdriver to lift the clamp metal so it fits into the grove of the plate, do this for both sides.
needle plate.
there is a fat stud and a small stud for the plate to fit in.
take the plate and slide it under the fat stud, it will lift as its spring loaded, push it all the way and then the small stud will fit into the other side
Not finding what you are looking for?