Nostalgia Electrics Hot Dog Grill Roller with Griddle - Answered Questions & Fixed issues

Then you are stuck with it, either that or you search for a replacement receptacle online & then take it back

The 5 rollers are operated by 9 small gears that a run by the center gear which is turned by the motor on your machine. The gears in between the rollers help drive the next roller as you move outward from the center. The gears are made of what looks like pot metal, (cheap junk). The teeth break on the gears easily and either stick or won't operate the next roller. You can take the unite apart using a thin screw driver an pry the 6 flange on the drive side and straigten the flange with needle nose plyers. It then prys apart. If any teeth are broken, you can only buy a whole new grill part from Nostalgia Electrics. Cost is 20.00. They won't just sell the junk gears

Hi,
Once you have the rollers hot (10 min.) it should only take about ten minutes for the dogs to heat up... they are fully cooked so you anly have to get them hot, but you can let them on for a much longer time if you want too, like if you are selling them at a stand...

heatman101

Experiment with it. Start with just a little oil and periodically add more until it flows properly. Be sure it sets up when it gets cool, if it doesn't you have to much oil.
Good Luck,
Gilshultz

http://www.beveragefactory.com/pdf/nostalgia/hdr-565.pdf has what your looking for

This is an electric hot dog steamer, the result is apparently excellent.

Read below:


Nostalgia Electrics Old Fashioned Hot Dog Roller with Grill Pan


Meijer: Nostalgia Electrics Old Fashioned Hot Dog Roller Grill/Griddle

I found your owner's manual here: http://nostalgiaelectrics.com/?wpfb_dl=155 Took a fast look through it and found no reset switch. However, there is an automatic lock. Just hit the cancel button and within 2 minutes, use your unit.

Water line may be frozen, heat it with a hair dryer, see if water then flows.This can happen if aair flow to bottom of frig is blocked.

Double check the kettle is plugged in tight, otherwise there are no repairable parts on Nostalgia poppers.

i lent mine out and it came back without a cord , found one on a old burnt out pitzelle iron that worked in my pile , it's just not as long as the original lesson: look at your other appliances you might allready have one !!

What would you like to know.

There are no parts available for Nostagia brand anything, anywhere. Replacing the popper with a better brand is your only choice.

http://www.nostalgiaelectrics.com/default.asp?c=4 the customer support has an option to dl a manual.

Nostalgia does not have repair parts, return the machine to where you bought it.

need a manual for a oster pro. popcorn maker serial # 2003398/ intertek

Common mistake. Handle has reverse thread. Screw it on backwards. This is a safety measure. Hope this helps.

ManualAbove is the link to the manual for the RPK630.

Maybe this will help. Not sure what the model is your looking for.

http://kitchen.manualsonline.com/manuals/mfg/nostalgia_electrics/nostalgia_electrics_corn_popper_product_list.html

make and model to help you please

mypopcornmachine.com has info