20 Most Recent
Disney Princess TV/DVD Combo - Page 7 Questions & Answers
My winnie the pooh tv/dvd
Hi
from here in the middle of the night
do you still have the manual?
if you do consult it
if you don´t look out for all conections,scart and what have you???????????????
Good luck
kolla bolla
I'm trying to get my daughters wii to work on her
Typically if the connection on the tv doesn't work right away with the composite cables, (red white and yellow) it's the cables.
I would suggest you replace the cables that you're using, this may alleviate the issue.
We purchased a mickey mote
did u ever find a resoulution?? we just purchased one as well. that came with mickey round up dvd..we purchased a compatiable handy manny an baby einstien dvd. we cant get mote to work...or do set-up. Any suggestions??
NO PICTURE-NO SOUND> REDLIGHT COMES ON ONLY
open the set and look for any blown fuses or a shorted transistor, now if do not have repair skills call the repairman this could be a headache
he should not charge you too much since this is an old tv. with parts and labor no more than $150.00
good luck
[email protected]
High school musical tv
Resetting the TV
If the buttons on the remote AND the buttons on the TV case do not work (channels do not change and you cannot open or navigate the menu), the TV has stopped responding. Reset the TV as follows:
NOTE:
Some TVs have a reset button. If available and accessible, try using the reset buttons before using the steps below. Using the reset buttons can save time.
1. Unplug the TV power cord from the power outlet for 4 hours.
2. Unplug any connected devices (DVD, Set-top boxes, etc...)
3. Press and hold the TV power button for five seconds.
4. Plug the TV power cord back into the power outlet and turn on the TV.
5. Open the on-screen menu to confirm that the TV is responding again.
6. Turn off the TV and reconnect the devices.
7. Turn on the TV.
hope this may help;
Regards,
VOTIT
How to remove child lock from BELTEK TV?
general steps:
Get the TV remote control and push the "Menu" button and select "Options".
Select "Child Lock" from the "Options" list. On some televisions, the "Child Lock" is named "V-chip".
Choose the "Remove Child Lock" selection. Highlight this and then hit the "Enter" button.
Enter the four-digit code that you used when you activated the child lock feature. If you cannot remember it, your only option to deactivate the child lock is to reset the TV. The instructions for resetting a TV is written on the user's manual of the TV.
Exit the TV menu once you have entered the four-digit code. To do this, press the "Exit" or "Menu" button on the TV's remote control.
If you don't have a remote, you might try leaving the TV unplugged overnight. Some TVs will 'forget' their settings if left without power for a long period. You could also potentially buy a cheaper universal remote, and use that to turn off the child lock.
How to pairing Ruwido Amadeus R 9710 to tv?
To pair your Ruwido Amadeus R 9710 remote to your TV, you can follow these steps:
Insert Batteries: Your remote is powered by two 1.5 V AAA batteries1. Make sure to insert the batteries correctly.
Switch on your TV: Ensure your TV is turned on.
Press the TV key: Press the TV key on your remote control for approximately 4 seconds until the LED flashes twice.
Enter the Code: After seeing the 2 flashes and within 5 seconds, enter the 3-digit numerical code from the list provided with your remote2. After entering the code, the LED will flash twice indicating that the code has been accepted.
Test the Remote: Point the remote control towards your TV and press the key. If your TV does not respond by going into Stand-By mode then repeat steps 3 to 5 and enter the next code in the list.
Bed.-Anl. H2 Version1 (ruwido.com)
Not finding what you are looking for?