20 Most Recent Sharp XE-A404 PC Desktop Questions & Answers

Try

http://www.manualnguide.com/download/manual-guide/sharp-xe-a404-cash-register-manual.html

and halfway down page of;

http://www.cashregisterstore.com/software.html

This question is too old to qualify for an answer: Evidently, there is no QUALIFIED answer or solution to your problem:

Click the link below :----http://wikisolutions.blogspot.in/2012/02/get-free-answers.html

You have logged yourself out of the machine. Press CL then 1 then CLK# or CASH#

If there is still a $ amount in the display enter that amount or more and press the CA/AT/NS key

Hi,
Go to the link
http://www.manualnguide.com/shared/sharp-xe-a102-cash-register-operation-manual/35/

and download your manual.

If the batteries wore down so much that the till lost or corrupted its memory, it will need to be memory reset and reprogrammed from scratch.

YOU have to link the tax to all taxable departments

Turn your key to the position between OFF and REG and press RCPT button

Key on p pres 5 then decimal them 1(for clerk 1) then X then type in the name then cash

key on p pres 5 then decimal them 1(for clerk 1) then X then type in the name them cash

Make sure the paper is on

SWitch that machine off and call a technician before you damage it further. Please note that all juices with sugar natural or artificial are acidic and the more time you take to have it removed proffessionally the more damage

Did you check to see if the retainer has been removed, that the print head release lever is in the print position, or that there is a paper roll in the Receipt and/or the Journal? Aslo, make sure that he Journal Return wheel is not broke on the side that holds the wheel in place. That's the only time I have recieved that message.

is XE-A41S. I Pressed the wrong button.

you have to run the program as administrator. left click on program icon to bring up menu

save your program data if you wish keep it on a sd card
remove the batteries and unplug. wait 5 minutes,, put key in, turn to reg and plug in.

you should get 3 beeps... all is set to default now and ready for programing