Top 20
Zyxel P660HW-D1 Router Questions & Answers
Find wep key
Wep key in on the side, back or bottom of your router. usually about 15 or so numbers and letters. Mac key ore pc key etc.
Key phrase
First, go to this site -
660HW Series ZyXEL - and download a manual for the ZyXEL P660HW-D1.
Quick start guide
Download Library
Next, hook up the router to your computer with a LAN cable. Open a browser and enter 192.168.1.1 into the url address window. The default login is 1234
. Then configure the wireless settings - see pages 6 & 7 of the guide.
Wireless key phrase
Try typing the router ip address into your search engine and you should get a page where you can make adjustments to the basic setup
I dont no mypassword of wifi
If you got WPS capability on the device you are trying to connect you can push the WPS-button on the router, or you can login to the administration interface on the router (IP-address might be underneath unless you don't know it) and change the password to your liking. If you don't know the login and password for your interface then i guess the last resort is to find the reset button on the router and use the provided login that usually is found on a sticker underneath the device (your router), and simply set a new password for your WIFI.
Network security key
First I would try a factory reset, by holding the reset button on the back of the router for like 5 seconds while plugged in.
Changed provider
Type into Browser; http://192.168.1.1/The password should be; admin
CANT CHANGE ROUTER PASSWORD: ZYXEL
The default password for these routers is 1234 and no username. SO if you want, you can reset the router to Factory defaults and then reconfigure all again with your own password
Is it possible to change wpa2 to wpa?
Yes you can, but WPA encryption is not as strong as WPA2.Go into your router's wireless setting and change the encryption setting to WPA and enter a new encryption code (hex numbers), your router may allow you to enter a passphrase in lieu of hex code. This is easier to remember a phrase than a bunch of numbers. After you save and exit the router you then need to apply the router's wireless settings to the wireless card in the computer to allow the computers to connect to the wireless router.For further information -To secure your wireless network from unauthorized access,please click on this link and follow my instructions :-
http://www.fixya.com/support/r3559128-wireless_router_security
Not finding what you are looking for?