Zyxel P660HW-D1 Router - Answered Questions & Fixed issues

you need to set wan type to PPPOE for ADSL ADSL has one IP address coming out of your building to the ISP How does it connect many internal computers to just one outgoing IP address you may wonder. It uses different port numbers for each computer on the same ip address via a PPPoe connection . http://searchnetworking.techtarget.com/definition/PPPoE if still stuck call your isp for help you will most likely need dynamic IP for the isp ip and DNS /

You need to do port forwarding on your router. First, you must setup a static IP address on your XBOX. Then You must open these ports on your router setup page using Port Forwarding feature. 80 TCP and UDP, 53 TCP and UDP, 3074 TCP and UDP.

the zyxel is used for secure network.
you need to enter the admin passw first and enter on port forwarding the ports numbers of XBOX
enter folling ports

TCP 80

UDP 88

UDP 3074

TCP 3074

UDP 53

TCP 53

Now test again.

Not if this is a home router. Some expensive enterprise routers can be managed with scripts that will allow specialized commands.

Wep key in on the side, back or bottom of your router. usually about 15 or so numbers and letters. Mac key ore pc key etc.

First, go to this site - 660HW Series ZyXEL - and download a manual for the ZyXEL P660HW-D1. Quick start guide Download Library Next, hook up the router to your computer with a LAN cable. Open a browser and enter 192.168.1.1 into the url address window. The default login is 1234. Then configure the wireless settings - see pages 6 & 7 of the guide.

Try typing the router ip address into your search engine and you should get a page where you can make adjustments to the basic setup

My thoughts are: have you tried a different browser? Do you have a valid admin login?

If you got WPS capability on the device you are trying to connect you can push the WPS-button on the router, or you can login to the administration interface on the router (IP-address might be underneath unless you don't know it) and change the password to your liking. If you don't know the login and password for your interface then i guess the last resort is to find the reset button on the router and use the provided login that usually is found on a sticker underneath the device (your router), and simply set a new password for your WIFI.

It isnt a problem. Its just an indicator.

First I would try a factory reset, by holding the reset button on the back of the router for like 5 seconds while plugged in.

P-660HW-D1 Jan 19, 2007 Uaer guide - Server 1Server 2

Type into Browser; http://192.168.1.1/The password should be; admin

You would see an extra IP device connected on DHCP via the web admin.

I believe you can only access it from a web interface, You did not state how you were using the command such as "from a command prompt on windows", "attempting to use a program such as telnet" or other.

No, set the channel to different settings.

Try these guys.http://portforward.com/english/routers/port_forwarding/ZyXEL/P-660R-D1/Minecraft_Server.htm

The default password for these routers is 1234 and no username. SO if you want, you can reset the router to Factory defaults and then reconfigure all again with your own password

slt tous le monde svp je cherche le mot de passe de router inalambrico telefonica zyxel p660hw_di 1234 ne marche pas merci.