Nortel MERIDIAN M2250 ATTENDANT CONSOLE (NT6G00-35-003) - Answered Questions & Fixed issues
When I attach a headset
Turn your handset connection with the dual plugs the other way!! You have them upside down!
Ohf failure
Hello,
Here Are How to Program a Nortel Phone in other to avoid failure in operation.
The
Nortel company produces phones and office equipment that are used
across the United States. The Nortel line of office phones can be used
to set up an internal phone system that can be used to communicate with
other phones in the same building or connect to phones all over the
world. Nortel phones also feature many programmable buttons that you
can use to save frequently used numbers so that you can quickly dial a
number and stay on task. By using the programming function and the
keypad on your phone base, you can program up to 24 different numbers.
Instructions
-
Pick up the receiver of your Nortel phone off of the base. You will hear a dial tone.
-
Press
the "Feature" button on the base of your Nortel phone. Press the star
button followed by the "1" button on the keypad to store external
numbers.
-
Press
one of the 24 memory buttons on the right side of the base to begin
programming it. Once you have hit the button, press the number buttons
in the center of the base to dial an external number you wish to save
to the Nortel phone. Include the "9" button if you need to press it to
dial and external number and be sure to include the area code and
country code to dial a long-distance number.
-
Press
the "OK" button save this number to the memory button you programmed.
Repeat Steps 2 through 3 to program other external numbers.
-
Press
the "Feature" button on the base of your Nortel phone. Press the star
button followed by the "2" button on the keypad to store internal
office numbers.
-
Press
one of the 24 memory buttons on the right side of the base to begin
programming. Once you have hit the button, press the number buttons in
the center of the base to dial an internal office extension number you
wish to save. Dial the number just as you would to reach it normally.
When finished, press the "OK" button to save your number.
-
Repeat Steps 5 through 6 to save other internal office numbers.
Good luck and thnaks for using fixya.
My Nortel MERIDIAN M2250 CONSOLE
Hello.
There could be faulty equipment or a bent cable.
First, disconnect the power to the attendant and then reconnect.
If still a problem, observe and note where all the cables are specifically connected to the console. Disconnect all the cables and connect one at a time to see if the noise returns. If you hear the noise with a certain connection, you'll narrow where the problem lies.
Hope this helps.
MWI for voice menu definition with muliple mailboxes
why define them as EM,if you set them as regular mailbox's and use the scr dn key 0 as the mailbox with the other numbers as secondary numbers in the mailbox profile.sorry for delay i am only new...i hope this helps in some way
No talk volume.
the handset may be in upside down.you can also switch sides as the console can be plugged in on the left or on the right hand side.
the wires do come loose at the jack end ---not the plug end,in which case it needs to be cut and re crymped.....i hope this helps
HOW TO CANCEL A DIVERT FROM ANOTHER EXTENSION NUMBER
no you cannot prevent this from the attendant console.aa is not normally set up.your installer needs to change the class of service of your extension to stop forward no answer. if the other phone/office is unoccupied try leaving it off the hook,your own phone may not want to forward when the other one is busy...i hope this helps
Not finding what you are looking for?
