Top 20 Nortel MERIDIAN M2250 ATTENDANT CONSOLE (NT6G00-35-003) Questions & Answers

Turn your handset connection with the dual plugs the other way!! You have them upside down!

Hello,

Here Are How to Program a Nortel Phone in other to avoid failure in operation.

The Nortel company produces phones and office equipment that are used across the United States. The Nortel line of office phones can be used to set up an internal phone system that can be used to communicate with other phones in the same building or connect to phones all over the world. Nortel phones also feature many programmable buttons that you can use to save frequently used numbers so that you can quickly dial a number and stay on task. By using the programming function and the keypad on your phone base, you can program up to 24 different numbers.
Instructions

1. Pick up the receiver of your Nortel phone off of the base. You will hear a dial tone.
   
2. Press the "Feature" button on the base of your Nortel phone. Press the star button followed by the "1" button on the keypad to store external numbers.
   
3. Press one of the 24 memory buttons on the right side of the base to begin programming it. Once you have hit the button, press the number buttons in the center of the base to dial an external number you wish to save to the Nortel phone. Include the "9" button if you need to press it to dial and external number and be sure to include the area code and country code to dial a long-distance number.
   
4. Press the "OK" button save this number to the memory button you programmed. Repeat Steps 2 through 3 to program other external numbers.
   
5. Press the "Feature" button on the base of your Nortel phone. Press the star button followed by the "2" button on the keypad to store internal office numbers.
   
6. Press one of the 24 memory buttons on the right side of the base to begin programming. Once you have hit the button, press the number buttons in the center of the base to dial an internal office extension number you wish to save. Dial the number just as you would to reach it normally. When finished, press the "OK" button to save your number.
   
7. Repeat Steps 5 through 6 to save other internal office numbers.
   

Good luck and thnaks for using fixya.

Hello.

There could be faulty equipment or a bent cable.

First, disconnect the power to the attendant and then reconnect.

If still a problem, observe and note where all the cables are specifically connected to the console. Disconnect all the cables and connect one at a time to see if the noise returns. If you hear the noise with a certain connection, you'll narrow where the problem lies.

Hope this helps.

Most systems use the volume up and down buttons while the call is ringing in.

You may be in the headset mode or your handset may be plugged into the headset jack, depending on the model of your phone.

ofh failure

Hello! Have you gone through basic troubleshooting in the call plot user guide? Also; On the right hand side there are four lights, Counting from the bottom up; Which light comes on/then off?

Guru.................saailer
I’m happy to help further over the phone at https://www.6ya.com/expert/david_6df67de3b14de867

contact your service provider

Did you try moving the console to new tn's? If there is a smell...whatever happened might have blown them. Good luck

the user guide has being downloaded to this site
there should be no issues..keep in touch

Call the automated system and press # key before dialing further keys.

no you cannot prevent this from the attendant console.aa is not normally set up.your installer needs to change the class of service of your extension to stop forward no answer. if the other phone/office is unoccupied try leaving it off the hook,your own phone may not want to forward when the other one is busy...i hope this helps

the console must be in night mode to access options and volume.

THE HANDSET IS PLUGGED IN UPSIDE DOWN

You need to divert the calls.
Check this user guide

why define them as EM,if you set them as regular mailbox's and use the scr dn key 0 as the mailbox with the other numbers as secondary numbers in the mailbox profile.sorry for delay i am only new...i hope this helps in some way

the handset may be in upside down.you can also switch sides as the console can be plugged in on the left or on the right hand side.
the wires do come loose at the jack end ---not the plug end,in which case it needs to be cut and re crymped.....i hope this helps

Question edited for clarity. Question moved from Computers category. Page 17 refers. Make sure your Telco hasn't dropped Caller ID.

PowerTouch - Vista 350 Screen Phone User Guide

Rhode Island Telephone https://www.ritelephone.com > system-manual > powe... PowerTouch - Vista 350 Screen Phone User Guide. Installation and features ... Callers List ..

The Nortel N441 appears to be little known and there is no one saying you can get a headphone for it. https://www.google.com/search?q=Nortel+N441+headset No manuals for it. https://www.google.com/search?q=Nortel+n441+Phone+User+Guide ..