LG 42LC2D 42 in. LCD HDTV - Page 8 - Answered Questions & Fixed issues

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Start reset as per user manual instruction supplied by the TV dealer when you purchased the TV in

Of course it can be replaced, but first quote it from the repair centre to see it is really worthwhile to replace it or to buy a brand new one.

You need to check with your TV dealer to see if you can purchase a TV stand for this model or not.

you have to set-it up with the set-up code to your TV brand. Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" or "Magazine" view. It will make surf easier. http://electrohelponline.blogspot.com/ http://remotesearch.blogspot.com/

Yes Of-course. the lamp has a life time. Refer its user manual to get more details. http://electronicshelponline.blogspot.com/

You may have loosened a cable, check all of them, or you may have changed the input setting on the TV. Check the input setting of the TV to be sure you are on the proper one the cable input.

Processor clocking problem most likely. Can be from a number of areas in the system that deals with display decoding.

http://www.lg.com/uk/support-product/lg-42LC2D# Here is the link to a free download of the manual. Make sure all of your cables are correctly inserted and if all else fails, try a factory reset as described in the manual.

Check the speaker/s first. If found OK; check and replace the damaged component/s at its audio output section circuit board. If needy, replace this board as card basis. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Surf the site with patience. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

it should be an ac fuse right on the power supply board.

Go into your TV Menu and select audio, click right arrow and page down to speakers, click right arrow, page down to speakers and select "ON". If the marker is on "On", open the back of TV and check that the the plug on the Menu/Volume control Panel on the side or bottom of TV, is correctly seated as I have often found that this plug is loosely inserted and eventually falls out. Factory QC not so good. If non of above helps, you will have to take the TV to a Service center.

You television signals are broadcast from both the Rumpster Forest Transmitting Station near the town of Wick, and Keelylang Hill near Kirkwell. It appears that the BBC channels are transmitted from Keelylang Hill, THIS LINK will give you the specifics! Keelylang Hill Full Freeview transmitter

Go to LG.com. Select "support" on the menu, then enter your TV model number. You can then download the owner's manual that will tell you how to program the remote. Remember, this only works if you have the original remote.

How can you expect a signal if your antenna is not connected. Your TV does not and will not except upgrades via your Decoder as the decoder is the only Item that can be upgraded. Your TV Screen gives you a picture of what your receiver sends to it.

If audio is OK, the problem is with its back-light. Check and replace damaged component/s at its backlight inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Surf the site with patience. Pull up older posts. Do a search by type in the brand name of your device at its search box. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/

Try a different tv with the same exact connection, if it works it might be the signal ( input Board ) in that Tv!.... But if it have same Problem change cable!... geo

To solve your problem , I advise you purchase a replacement remote. It is readily available for your TV. 19 95 LG 42LC2D TV Remote Control Free Shipping . Do a web search; 'replacement remote for LG 42LC2D', and there will be several web sites which have the remote. That way, yo will have full function of your TV.

yu need to reset yu tv tu factory reset

I don't quite understand what you're asking. What it seems like is you're wanting to program an LG t.v. with an RCA remote. If that is correct, throw out the RCA remote, and purchase a programmable remote with a return policy. Logitech is usually a safe bet. If that's not correct, please give more detail.