Top 20 Maxi-Cosi CabrioFix (Black Reflection) Infant Car Seat Questions & Answers

Hi What is your enquiry about the Maxi-Cosi CabrioFix please?

Hi Please contact us via the Facebook page with a PM so that we can send you instructions on removal of the base from the vehicle.

Which IsoFix base do you have?

Hi Page 7 CabrioFix User Manual

Hi Fabric is designed to be removed for washing, either handwash or handwash / delicate cycle on washing machine is fine, maximum 30 degrees, ensure you use additional rinse and spin to completely remove all detergent residue as leftovers will dry and leave white marks.

Hi We would advise you to contact Dorel Australia for assistance with available products which meet Australian standards.

Hi Tobias Due to the safety implications of the spare part item being incorrectly fitted we do have to strongly advise that the carseat is sent in for our engineers to provide inspection & repair.

If you're in the UK you can order direct from the customer care team Maxi Cosi CabrioFix Spares

Hi To loosen the harness on the CabrioFix depress the button on the tensioner housing unit and pull both harness straps toward you together as instructed in the User Manual. If this is not working it will need to come in for inspection and repair required. If you're in the UK and the carseat is under 24 months old please return to your retailer with proof of purchase for them to send to our engineers for inspection / repair under warranty terms and conditions. If you're in the UK and it is over 24 months old or you no longer have proof of purchase you can book in with the customer care team directly on 01284 413 141 Mon-Thur 08:30-17:30 / Fri 08:30-16:30 (Excluding Bank Holidays) Standard cost is 39.99GBP which does include courier collection and delivery. if you're not in the UK please visit www.maxi-cosi.com and select the country you're in, then choose the Contact Us tab on the right side of the screen for your enquiry to be sent through to the customer care team in your country who can assist.

Try pressing down very hard on the seat while trying the release. If that does not work, call the manufacturer.Note: if this does release, check the seat belt for damage before using again. Also check that the belt path used to install the base is/was correct.-- Marc

HiThe harness of a carseat should never be removed or replaced by anyone other than a trained engineer due to the safety implications of it being incorrectly replaced.The carseat fabric should be removed from this carseat and they can be washed - the harness itself should be cleaned in place in the carseat using a solution of stain remover and water and a small scrubbing brush or hard scourering pad to clean the harness. Excess water in the carseat should be dried immediately and thoroughly to prevent any parts rusting. Loose crumbs can be removed using a vacuum cleaner.Alternatively the carseat can be sent in for the engineers to replace with a new one. Inspection and single repair (replacement of the harness) plus safety checks and courier collection and repair can be booked for 39.99GBP if you're in the UK by calling 01284 413 141 Mon-Thur 8.30-6.30 / Fri 8.30-4.30 (Excluding Bank Holidays)

Please contact Maxi Cosi USA by e-mailing to [email protected] and they will be able to assist.

Hi Maxi-Cosi do not produce adaptors for the carseats to be fitted on other manufacturers chassis. If there are adaptors to fit the Maxi-Cosi carseat to this model chassis they would be manufactured and sold by the manufacturer of the chassis, so you should contact them for assistance.

Hi,Open the carseat harness and have the carseat in front of you so you\'re looking at the seat. Slide the shoulder harness pads down the length of the harness and off over the harness clips. Unzip the footmuff and place it into the seat and thread the harness through the holes at shoulder and crotch position. Replace the shoulder harness pads onto the harness. You can now place your baby in, do up the harness + tension correctly, then zip up the footmuff to keep baby cosy.If you\'re still using the headhugger/lumbar support wedge this can be used underneath the footmuff.

Hi,The sun canopy has a length of elastic at either end with a turn-over that is stitched in place. These lengths of elastic need to be pushed past a nub of plastic inside the sunshade rim around where the handle of the carseat is joined. Pull them past the nub of plastic and release, and the turn-over will prevent it popping past the nub. Tuck in the sunshade around the rim.

Hi,The handle is not any part of removing the CabrioFix from the Easybase 2 apart from to lift the carseat away from the base. You need to press the grey / silver buttons on either side of the carseat and hold them down as you lift the carseat from the base to remove it.If you're still unable to do so we would advise you to take the product to your retailer with proof of purchase for them to investigate further.

HiWhen you press the silver / grey button at the front of the carseat you should pull both harness straps at the same time and it should loosen the harness. If this is not happening the carseat needs to be inspected. Please contact your retailer with proof of purchase if it is under 12 months old. Alternatively please let us know what country you're in and we can put you in touch with the correct customer care team to assist.

It would depend on which base you have. Visit www.maxi-cosi.com and select your country, then select the base you have and you will see an option to download the instruction manual/view an instruction video on how to fit. Alternatively contact your retailer and ask for further instruction on how to fit it.

HiMaxi Cosi CabrioFix User Manual

Hi,

The Maxi Cosi Mico isn't a product available in the UK so we're unable to assist with your enquiry. Please contact Maxi Cosi USA by e-mailing to [email protected]