Top 20 Olevia LT32HVM 32 in. LCD Television Questions & Answers

Check the source button on the TV remote is to the correct input!

Main system control memory IC fault. This is a very small IC; have 8 solder terminals, and can be located very near to the main system control-chroma IC. Check and replace it. Be sure to replace it with the same number printed on it; in all respect. Otherwise, it won't go. http://electronicshelponline.blogspot.com/ Before replacing it, try a reset to this set, and then check. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here.

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electro-medical.blogspot.com/ http://electronicshelponline.blogspot.com/ Faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent. Faults to all LCD screen are similar, irrespective of its brand and screen size.

It's somewhat skilled work. It will be best to contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Firmware update procedure to popular brand TVs are given with screen shots of the displays.

Do a search on Amazon for your Make (GE) and Model #, Universal remote or remote and you should get a list of remotes made for your TV. ...or try several search engines looking, again for Make and Model # but this time add the words, "Universal remote code."

If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its user manual. Never accept a remote control, that hasn't both of this. If you see the site by "MOSAIC" or "Magazine" view, will make surf easier. http://electrohelponline.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops. Check this link too. http://remotesearch.blogspot.com/

Sounds like main board is faulty. Contact any service technician to confirm. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" will make surf easy. Surf the site with patience. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ For some reason, if the firmware has been corrupted, this kind of fault can occur. If so it will be best to contact any service technician.

If cable from cable box is connected to TV, use TV remote to switch to Cable input if you have a Cable/DVR you will need to run speaker wires from Cable/DVR to a TV input

Check and replace damaged component/s at its back-light inverter circuit, or, replace the back-light inverter board as card basis. There is no back-light to your TV; is the fault. If you wish to get some details, check the site linked here. http://electronicshelponline.blogspot.com/ Pull up older posts. Check the site in 'Mosaic' view. It will make search easy.

Do you have zoom buttons on remote...Changes the size of picture on the screen?

Do you mean that the source button on the TV itself does not switch to the input of the TV that you are connected to?

does it go away after the set warms up? or if you tap or squeeze that side of the set?

To my knowledge nothing but the original remote will function on that set.

Its called closed captions and the set has it built into it---look for captions in the set menu and turn it off with the remote--NOTE: MANY CABLE OR SAT BOXES ALSO HAVE THE CAPTIONS IN THEM-it can come from either the set itself or from a box connected to it for signal.

Check this code. This is code for Olivia TV with GE universal remote control {1027}

what remote are you programming to this tv

Google the model number of the remote for a "manual" which will have instructions Keep in mind not all remotes will even program for all sets.

Setup code for Olevia TV seems to be :1027For more details to get codes and setup proceedigns, visit this site Electro-help. Type in 'electronicshelponline.blogspot' into your browsers, search box, and click search. it is an electronic equipments service help site in English language. A blogspot site. Pull up older posts there.

It may be possible but the best way to find out is contact Olevia and talk to the customer service department.

my olevia a 232 s12 2nd hand tv . gift from a relative wont power on .just had the blue light on.i was able to reset my 32 inch olevia by pressing and holding down the power button much like a computer to reboot.might work for you.