20 Most Recent Fujitsu Siemens Siemens PRIMERGY RX300 Server Questions & Answers

standard troubleshooting: 1) I've seen power sources appear to power up a system, but are somehow broken just enough to not get the system to POST (do you have another system you could at least borrow the power source from?) 2) pull anything you can so that you just have mobo, power, cpu, memory, and graphics. 2a) try using just one memory chip (and try each chip you have, or best to borrow a chip from a working system); even try different slots 2b) if onboard graphics, try a known working graphics card addon 2c) does the screen power off (like normal sleep) or system shutdown? if latter, try re-thermal pasting the heat sink to the cpu. I’m happy to assist further over the phone at https://www.6ya.com/expert/shunter_ccf54e0913bd0501

I hesitate to even answer this question as it should be blatantly obvious but... Replace the drive.

Far too little information. What have you done to research this? Does your system have a BMC installed? If so, have you looked at the SEL logs? Need information here. The question is completely impossible to answer otherwise.

What light is flashing? Here's the manual: http://manuals.ts.fujitsu.com/illustrated_spares/content/RX300_S3/pdf/ba.pdf

Orange CSS LED bulb is light what does that mean

Svend, you should try to contact Frederic E. on facebook to solve this, I'm pretty sure you know his family name ;)

Hi
Try using ttps://launchpad.net/gpoweroff also the other way to set auto shut down is

Also another way is

A simpler way is to add the appropriate shutdown command to the /etc/profile file (as root):
Open a terminal window and su to root:
[user@localhost ~]$ su
Password: (enter root password here)
This example will open /etc/profile in the kate text editor:
[root@localhost user] # kate /etc/profile
Add the following command to the end of the file:
shutdown -h hh:mm
Replace hh:mm with the time at which you want the computer to shutdown automatically each day
The -h option tells shutdown to turn the
computer off (halt).
For more information on the shutdown
command open a terminal window and enter:
man shutdown
Remember, the man command is your friend.
With it you can get information on nearly
any command available in your Linux system

Let me know if this helps

I have Fujitsu laptop some of the keys are lock how do I unlock them please

It's the condensator near RAM. Exchange - it works.300 µF / 6,3 V

WPA2 is considered insecure and hacked years ago. You might try WPA, or get a different Adapter.