20 Most Recent
Icom IC-M505 - VHF/DSC Marine Transciever - Page 4 Questions & Answers
How can i fix a interface of icom ic-a110´s microphone?
Hi Yanielki,
You want to interface a IC-A110 mic with what other piece of equipment?
Are you looking for a wiring diagram?
What's the problem?
Explain more and myself and plenty others would be happy to help.
Regards,
John
How do you recalibrate the SWR meter in an Icom 706Mkiig radio. I changed the filter board and it seems off now.
Hello,
You will need the service manual to be able to do this and you will also need to purchase a 150 ohm carbon film resistor (no wire wound resistors) to simulate a 3:1 SWR to reset the onboard auto tuner base line for SWR. I believe you may find a service manual on BAMBA's website to download for free. The auto tuner is factory set to work up to a 3:1 SWR before it gives up trying to match the antenna. So, this is a resistor you will need or make up a 150 ohm load using a combo of resistors as long as they are not wire wound types. 73, Dennis
Icom ic 726
I usually replace all of my radio lamps with Ultrabright LEDs. They come in many different colours and usually fit the same mounting hole as the incandescent lamps. They will need a current limiting resistor in one of their leads, 2200 ohms to 4700 ohms at 1/4 watt works well. Leds are polarized so make sure that you get the polarity correct. Leds are also about 1/10 the cost of a similar incandescent bulb.
Icom t8a programming software
Here's a FREE software program for your ICOM. It is called CHIRP... just google it. I use it a lot.... chirp.danplanet.com
Not finding what you are looking for?