Logitech 967437-0403 Keyboard - Answered Questions & Fixed issues
Can't use PrintScreen key on
It's what you do AFTER PrtScr that matters.
Basically the key takes a snapshot of the screen and stores it on the Clipboard. Next PASTE it into an application like Paint and Print from there. Or paste into a document you are working on that requires a screen clip (after editing it, if needed).
Rate me 4 stars is this helps!
10/25/2017 3:56:04 AM •
Logitech...
•
Answered
on Oct 25, 2017
•
160 views
Rupees symbol k200
It depends what program you want it for. You should be able to go into the insert settings of the program, and input a code for the rupee symbol. If not, maunally add it in at control panel.
12/7/2018 3:07:35 PM •
Logitech...
•
Answered
on Dec 07, 2018
•
133 views
No lights on keyboard
Several possibilities.
Your unit is wireless so the most likely is the USB Wifi receiver has lost connection. Unplug the USB receiver and plug it into a different USB port.
It is possible the unit battery has run down. Replace it with a fresh battery.
If your unit also has a wireless mouse with it and the mouse is still working, you may just have a faulty keyboard. It happens.
11/5/2013 10:24:27 PM •
Logitech...
•
Answered
on Nov 05, 2013
•
76 views
Logitech mk320 mouse freezes
If you have a extern video graphic cardPlease check if your motherboard has an onboard video. (INTEL motherboards for example) If so, go to the BIOS and disable it. I had the same problem and not only with Logitec. I disabled the onboard video and no problem anymore! It has something to do with windows updates, I presume. But the problem is solved.
6/14/2013 11:49:20 PM •
Logitech...
•
Answered
on Jun 14, 2013
•
223 views
How to use the rupees symbol in logitech k200 keyboard
you may download Rupee.rtf file from internet..Place it in Start> Control Panel > Fonts....When u open an editor like MS Word...for rupee symbol select "Rupee" from font drop-down and for typing it use the key just above the tab key on ur keyboard. You are done.
4/5/2013 10:16:33 AM •
Logitech...
•
Answered
on Apr 05, 2013
•
6,032 views
Keyboard is locked
Take the batteries out and put them back in - in a different order and push the re-connect button (usually red) hold it and wait for it to pick up the signal make sure no of your wires came loose - sometimes wires can get cause on drawers or chairs knobs and other things around the desk when we don't noticed and get dislodged so make sure the connection is all the way connected
1/16/2013 12:12:33 AM •
Logitech...
•
Answered
on Jan 16, 2013
•
45 views
I do not have the logitech setpoint
Setpoint can be downloaded from the logitech website. Go to http://www.logitech.com/en-us/support and find your device, then download the software and install it.
12/21/2012 10:51:19 PM •
Logitech...
•
Answered
on Dec 21, 2012
•
45 views
HOW DOES THE SPACE BAR CLIP GET REINSTALLED?
Take the wire piece out of the keyboard and attach it to the space bar by snapping the long horizontal section into the notched moldings you will see along one edge of the underside of the spacebar. Now turn the spacebar back over, orient it with the high side toward you and the lower side toward the other keys, fit the retainer ends into the slots in the keyboard, and push the spacebar center pin back into its hole. The wire is not really a retainer; it is there to transfer to the center pin any pressure applied to either end of the bar.
4/13/2014 11:45:22 AM •
Logitech...
•
Answered
on Apr 13, 2014
•
5,773 views
Use rupee symbol in logitech k200 key board
Please visit the link posted below and follow the guidelines provided in the link :http://www.quickonlinetips.com/archives/2011/07/type-indian-rupee-symbol-with-keyboard-key/
9/2/2012 5:06:30 PM •
Logitech...
•
Answered
on Sep 02, 2012
•
559 views
Logitech keyboard won't work
My key board stopped working. I replaced the batteries and I have know use of it. It will do nothing.
7/29/2012 1:11:16 AM •
Logitech...
•
Answered
on Jul 29, 2012
•
206 views
Can't get my logitech wave
Manual: http://logitech-en-amr.custhelp.com/app/answers/detail/a_id/18212/section/troubleshoot/crid/433/lt_product_id/7306/tabs/1,3,2,5/cl/us,en/kw/
Software: http://logitech-en-amr.custhelp.com/app/answers/detail/a_id/18209/section/troubleshoot/crid/433/lt_product_id/7306/tabs/1,3,2,5/cl/us,en/kw/
Troubleshoot: http://logitech-en-amr.custhelp.com/app/answers/detail/a_id/19271/section/troubleshoot/crid/433/lt_product_id/7306/tabs/1,3,2,5/cl/us,en/kw/
5/4/2011 5:14:40 PM •
Logitech...
•
Answered
on May 04, 2011
•
1,069 views
When i type a sentence
You need to toggle your overwrite/insert setting.
All you have to do is hit the "Insert" button on your keyboard. Hitting it once will set your type settings so that new text will be inserted instead of overwriting existing text. Hitting it again will toggle it back.
3/28/2011 4:05:22 AM •
Logitech...
•
Answered
on Mar 28, 2011
•
242 views
Not finding what you are looking for?