Top 20
Hitachi C25-RF35S 25" TV Questions & Answers
Service menu
Set volume to '0'. Simultaneously press Display button on the remote control, and Volume - button on the TV set to get into service mode. The is one way. The procedure will differ with models to models. If you wish to get more,
http://electronicshelponline.blogspot.com/ Check this link. Pull up older posts there, either by its left side bar, or
see it in
Timslide option.
6/25/2013 3:12:24 PM •
Hitachi...
•
43 views • 0 helpful votes
Bpl service menu code
press one time display key and three times mute .service mode will open
2/27/2010 7:40:34 AM •
Hitachi...
•
3,217 views • 25 helpful votes
- SKY REMOTE CODES
I own a One-for-All universal remote (model URC-4220), and my booklet says the setup code for a Hitachi TV is either 0000 or 0145. If these numbers do not work, then I would buy a newer universal remote. They can purchased at Walmart for less than 10 dollars.
7/11/2008 8:37:00 AM •
Hitachi...
•
473 views • 0 helpful votes
Hitachi CT7893
this is a job for experienced tech maybe your horizontal circuit is bad there is a blue capacitor that is comom go bat and short horiz. out transistor
3/29/2008 2:27:52 AM •
Hitachi...
•
141 views • 0 helpful votes
Pulsating power LED. No picture. No sound
Either the main smoothing capacitor or the voltage regulator are faulty. You may find that the power LED will stay on after pulsating for several minutes, at which time you can switch the TV on.
8/8/2007 5:53:49 PM •
Hitachi...
•
156 views • 0 helpful votes
Keep getting all time on screen c?? 48tn -311
Evilgenius - thank you thank you thank you!!! I've had that stupid code on the screen for the last year and even Hitachi couldn't tell me how to get rid of it! I used your directions about removing the r/c flap & pressing the tuning button. You have made our day - thank you!!!!!!
6/14/2007 4:37:31 PM •
Hitachi...
•
227 views • 1 helpful votes
Old Hitachi sound...
unplug the dvd in to the tv, see if u have sound then...gotta read the manual. go into menu and see if what the sound is.. u might have to switch it to tv stereo or mono.
gotta read the manual
good luck
6/30/2007 7:59:56 AM •
Hitachi...
•
140 views • 0 helpful votes
Popping noise
Does the " popping" noise come through the speakers or from the TV chassis ?
If it is coming through the speakers you could have a bad solder joint somewhere in the tuning circuit.
If it is a snapping sound coming from the chassis, then you probably have something arcing in the high voltage circiut. If this is the case then you should have it checked out since this can cause other parts to short shutting down you set completely.
1/21/2007 4:18:11 AM •
Hitachi...
•
411 views • 2 helpful votes
Change input on Hitachi LCD TV model LE65K6R9 without remote?
I'd unplug/disconnect the Roku and after 30 seconds try the control button on the back. If you can change the input do so, then plug the Roku back in. Until you use the input button on the back to change input to Roku, you should be able to use the other buttons on the back to control the TV. If this does not work, unplug both the TV and the Roku. Wait maybe a minute, then plug the TV back in and follow the above instructions. Here are other alternatives: Using physical buttons: You can find the physical buttons on the left or right back side of the Hitachi TV. Using these keys, you can change the input, adjust the volume, or turn on Hitachi TV without a remote. Press the Input button located at the back or side of the Hitachi TV. The list of connected sources will appear on the TV screen12.
Using external devices: Connect a wireless keyboard or mouse to your Hitachi TV and change the input1.
Buy a universal remote: You can buy a universal remote to control your Hitachi TV and change the source.
10/13/2023 6:39:10 PM •
Hitachi...
•
57 views • 0 helpful votes
How to remove small popup bottom left of Hitachi smart tv screen.
A little popup that appears in the lower left corner of your Hitachi smart TV screen may be related to one of the TV's settings or capabilities. You can attempt the following actions to get rid of it:
1.Investigate notifications:
Smart TVs occasionally show notifications for different events or upgrades. If there are any notifications, look for them and then clear them by following the on-screen directions.
2.Applications and Inputs:
Make sure all programmes and inputs are closed. The popup may occasionally be connected to an input source or app, which can be closed to get rid of it.
3.On-Screen Display (OSD) Off:
There might be an OSD option in the settings menu on Hitachi TVs. Try disabling OSD or changing its settings to see if it gets rid of the popup.
Verify any software/firmware updates:
4.Make that the most recent firmware or software upgrades are installed on your TV. Pop-up windows may appear as a result of faults in outdated software. Look for a software update option in the TV's settings menu.
5.Firmware Reset:
You can conduct a factory reset on your TV if the problem persists after you've tried various troubleshooting measures. The default values for all settings will be restored as a result. Make cautious to back up any crucial data before doing a factory reset because doing so will also remove any customised settings and data.
6.Message Hitachi Support here:
If none of the aforementioned fixes the problem, it's a good idea to get in touch with Hitachi customer service or refer to the TV's user manual for detailed instructions on how to get rid of the popup.
Regarding External Devices:
7.The popup may be related to any external devices you have connected to your TV, like a cable box or game console. Make sure that these gadgets are operating properly and that the settings have been changed as necessary.
Keep in mind that depending on the type and software version of your Hitachi smart TV, the precise processes and options may change. For instructions unique to your TV model, consult the user manual, or go to the Hitachi website for further help options.
9/30/2023 1:32:58 PM •
Hitachi...
•
64 views • 2 helpful votes
Hitachi LE42S704 none of the HDMI ports work, need to update (i think)
Are you getting the various HDMI inputs on the screen but it acts like nothing is connected? We have repaired hundreds of TV's with no HDMI signal over the years and have never had an update correct this issue. There is an IC close to the HDMI input jacks (U501) that decodes the data, that's always been the defective part. You can order the part and change it but you will need advanced soldering skills and the equipment to do it, I'd recommend replacing the main board if you can find one.
5/21/2023 11:04:17 PM •
Hitachi...
•
59 views • 0 helpful votes
Hitachi tv black screen ?
but nothing else
If your Hitachi television has sound but a black screen, it is likely that either the bulb or the inverter has gone bad. The inverter is a part of the backlight system. If the inverter is not functioning, the backlight will not work and the television will be dark. You should check to see if the bulb needs to be replaced first. If the bulb is working and the inverter doesn't turn on, then you may need to have a technician take a look at the television.
1/6/2023 2:11:14 PM •
Hitachi...
•
234 views • 0 helpful votes
Not finding what you are looking for?