Hitachi Recent Questions, Troubleshooting Help & Support

Easy to remove the cylinder and piston/driver. Remove four head bolts and lightly tap head to release gasket. Push out driver by inserting rod thru nose then remove spring retainer holding the cylinder in place.. With retainer removed the cylinder should pop out. Sometimes the retainer will cause a bur to form on the body of the mailer making it s bit more difficult to remove. Good luck

When its turn off, not unplugged, press at the same time ''Function Button" and the ''AUTO Swing" button on your Remote Controller.

http://www.specsserver.com/CACHE/frpkbuhuyqju.pdf

how about input then

Visit the site named 'Electro-help' for more details. Click this link. View it in "Timeslide" or "Flipcard" option, which can be selected from the drop down box menu by the [Sidebar] tag, at the top left corner of the display window. You can also click the [Home] tab to see the latest updates. It will make search easy. There are more than 1350 posts to different brand TVs now. Pull up older posts there or do a search by type in the Brand Name of your device in the Search Box, at the top right of the display window.

this problem arises when u disturbe the remote settings. to make it operate again use the following procedure
1.on the power from stablizer
2.press the button in remote with 'key' sign once
3.now adjust the number displayed in remote 9 99 to 3 25 by using 'down '(temp adjustment button) key.
4.press again the button with 'key' sign
5.now ur ac is reinstate
enjoy the breeeeeeeeezzzzzzzzzzzzzzzzeeeeeeeeeeeeee
thanks

atul sharma bikaner rajasthan india

There are many possibilities. contaminated fuel, wrong fuel oil mixture. air leak in fuel line, carburetor contaminated, or needs adjustment, choke problems, throttle problems. Try a small engine mechanic.

Well Im going through the same thing and no one can seem to figure out what is going on. Ive tried all sorts of disc including a DVD-RAM Video 60 and Im still getting the same Error #2881 Code.

Download the service manual and read it. Regards,

Serge.

I've had that happen before and what I found was one of the Staples or nails had misfired and wedged before leaving the gun. read the manual on how to get to it for that particular model and also it might be a good idea to adjust your pressure accordingly to keep it from happening again. If the force isn't set proper then a nail could Jam , block the mouth and not allow any other nails to exit. It's very easy to do and not that hard to fix once you've done it at least once. Good luck.

Hi, two things.. Either your remote needs new batteries, or you need to switch off your tele and allow it to reboot for a few minutes before switching it back on, I hope this helps