20 Most Recent
KLH ASW10-120 Subwoofer - Page 8 Questions & Answers
How to install KLH asw10-20 to a 7.2 receiver
Yes, the 10-120 can use a L & R low level subwoofer input. You can get a short 6" RCA splitter adapter from Radio Shack for a under $10. (1 female input, 2 male outputs) Alternately, just plug the subwoofer output on your receiver to just the low level R channel on the KLH sub.
1/21/2015 4:37:42 AM •
KLH Audio...
•
Answered
on Jan 21, 2015
Klh subwoofer keeps blowing it's fuse.
Most likely the amp in the sub has blown. It will need repair or replacement. I'd take it to an expert in repairing amps, it's not a job for you unless you're experienced in troubleshooting these things.
1/1/2015 10:05:37 PM •
KLH Audio...
•
Answered
on Jan 01, 2015
How do I wire ?
Wire what exactly. Which set of KLH speakers have you got?
9/11/2014 12:11:53 AM •
KLH Audio...
•
Answered
on Sep 11, 2014
DVZ-2500
You can't, unfortunately. Bizarrely, the system doesn't have any inputs, only outputs. There's no way to get a signal from the TV into the system. There's plenty of Amazon reviews calling this cheap junk. I'd be forced to agree.
9/11/2014 12:00:37 AM •
KLH Audio...
•
Answered
on Sep 11, 2014
Receiver static
It could be just a lead, check your lead heads and inserts are clean.
Check along your leads and wires for any obvious kinks / tight bends / cuts / nicks / something sitting down on it or any damage to the wires.
It could be there is another electrical device nearby interfering at a electromagnetic level.
It could be just the dials / knobs need taking off and cleaning in behind. the pickups, you may not need to remove them just spray with electronic cleaner
this stuff is great for lots of different electrical cleaning problems.
Good luck
2/10/2014 3:16:41 AM •
KLH Audio...
•
Answered
on Feb 10, 2014
Not finding what you are looking for?