20 Most Recent Kenwood KNB-15AM, ,TK260,TK-270,TK-360,TK-370, 7.5v 1700mAh NiMH 2-Way Radio - Page 3 Questions & Answers

You cannot reset if you dont' know, you need to replace the EEPROM IC or contact with Kenwood Co.

https://www.yoreparo.com/radiocomunicaciones/preguntas/1127812/diagrama-esquematico-kpg-10 From above link you can see and make cable for programming.

This pass word is at Power ON or Read/Write, in both cases it is better you change tge EEPROM or you contact with Kenwood Co.

You can read/write this radio by KPG-87D, open program, select model and write frequency. and write it at the radio, if you not succeed then change EEPROM and write ir,

From Kenwood Corporation you can get. Part #X58-4050-00 you can order for that.

Kenwood DNX573S 1 Search the unit ("DNX****") from your smartphone/cell-phone. 2 · Confirm the request both on the smartphone/cell-phone and the unit. · Input the PIN code in your smartphone/cellphone. PIN code is set to "0000" as the default. 3 Select the hands-free number to connect. A name of a smartphone is displayed when it has handsfree connection with the unit. By this way you can connect your bluetooth.

You check 5V and also change TL494 IC and your problem will solve.

Your language is not change, you Mark "Scrambler" you unmark it and you problem will be solve. Because if you mark it then you will not understand the receiving signal.

To resset the Transciver: with the power off press and hold the ptt, side 1 and side 2 button and power ON. Keep press for 02 second until the light turn to orange. The key must be release within 02 second after the LED light orange otherwise your resset procedure will cancel. The transciever announce "confirm" and returne to normal operation.

Use kpg-56d for programming your radio.

UHF Portable Radio, 450-520 MHz in this range you can program any froquecy if you have KPG-160d programming software.

SETTING To change the operating frequency of a channel: 1 With the transceiver power OFF, press and hold the PTT switch and Up key while turning the transceiver power ON. • Continue to hold the Power switch, PTT switch, and Up key until the LED indicator lights yellow and the transceiver announces "Self". 2 Release the Power switch, PTT switch and Up key. • The transceiver announces "Channel Number". 3 Press the Up/Down key to select your desired channel, then press the PTT switch to con? rm the selected channel. • Upon releasing the PTT switch, a beep will sound and the transceiver announces "Table Zero". 4 Press the Up/Down key to increment/ decrement the Table number, to select the new channel frequency. • Press and hold the Up/Down key to continuously increment/ decrement the number. • Table numbers and their corresponding operating frequencies are provided in the tables on pages 13 and 14. • A voice announcement will inform you of the selected Table number.

Please see this video and reprogram your radio. https://www.youtube.com/watch?v=ORzWf3vDNsU

Download it from following links. https://www.manualslib.com/upload/type/link/ https://www.manualslib.com/products/Kenwood-Kmr-440u-57403.html

Check to see if there is an internal button battery that saves settings. If it is dead, your settings will disappear as soon as you turn off the power.

https://www.amazon.com/KENWOOD-KPG-135D-2-10-PROGRAMMING-SOFTWARE/dp/B01F18797M https://www.amazon.com/KENWOOD-KPG-135D-2-10-PROGRAMMING-SOFTWARE/dp/B01F18797M https://www.youtube.com/watch?v=c-S_DHkcg6o

Yoou deselect key in programming. OR you press key one by one and when you see key sign dis appear,it mean your channel is unlock know.

make sure that both have a same frequency and same DQT of both radios ot at DQT select None. Then will see radios will works perfectly.

The best way is to get an after-market antenna that's compatible with the radio from your local ham shop, or online at HRO's website. Ham Radio Outlet World Largest Supplier of Amateur Radio Ham Radio...

I already answered this question and it was the second hit on google. https://www.manualslib.com/manual/908400/Kenwood-Tk-705.html Please just google, most of those manuals are just online.