20 Most Recent
Kenwood KNB-15AM, ,TK260,TK-270,TK-360,TK-370, 7.5v 1700mAh NiMH 2-Way Radio - Page 9 Questions & Answers
Locked
Press and hold the key programmed as
[Key Lock]
for
2 seconds to lock the transceiver keys. Press and hold the
[Key Lock]
key again to unlock the keys.
•
"
LOCKED
"
appears when a key is pressed while the keys
are locked
Kenwood tm-732a will not power up. In line fuse
press around board where power comes in to see if solder connections are weak. where the red and black wires come in, it's 12 volt power to the board its usually a reverse polarity diode, its black with a silver stripe around it, its job is to make sure it wasn't hooked up wrong, you could unsolder it MAKE SURE EVERTHING IS HOOKED UP CORRECTLY, turn it on for a test, if it works find a replacement diode.
Programming
Here are links to the
service manual and
owner manual. A quick search for "password" doesn't show up tho.. Read the manuals nd you should find out what is hanging you up. Good luck!
I have a tk -250 and I can hear everyone talking
Are you sure the people you hear talking are in the band limits of the radio. Generally, when they beep on transmit it's because you're trying to transmit out of band. If the stations you're hearing are near the band edge it's possible you have the "offset" wrong and when you hit the PTT, the shift (offset) in the wrong direction is taking the radio out of band.
Kenwood TH-41AT receives 40 kHz too high... can
Probably. How were you able to determine that the receive is too high? The 41AT has a PLL circuit that can be adjusted, but you'll need to find a radio tech who has access to the alignment instructions. Chances are, this is either a significant alignment issue, or a component in the PLL circuit has failed. Still, it should be repairable - the question is, "Would it be more economically reasonable to replace it with a new fully functioning radio, rather than invest in repairing a mostly outdated radio?"
Service manual
a service manual wont help. It's feedback from between your ears... HOW do you expect us to supply a service manual for an unknown kenwood model????
Th-234 picture
if you meant kenwood th 234, than you just simply pull up the lock batterey on the left of hand held than swipe left the batt compartment
Not finding what you are looking for?