20 Most Recent
Kenwood KNB-15AM, ,TK260,TK-270,TK-360,TK-370, 7.5v 1700mAh NiMH 2-Way Radio - Page 8 Questions & Answers
Tk 840 UHF
you also have to apply power to the pin labeled 'ignition'
Tuning my tk860
I assume you are looking for the service manual. www.repeater-builder.com/kenwood/pdfs/tk-860g-862g-svc-man.pdf
Password
Please provide some additional information about your problem, the model number and manufacturer of your equipment. Not enough information to help you at this time.
No signal on RX,only noice , TH22-AT
You have the 'squawk' turned up too far. This will be a standard dial or a small slotted dial inset in the body. Turn counter clockwise to lower the resonance effect. This should not be confused with a transponder squawk code, which is a different thing totally. If your model is more up to date then the squawk function will be automatic and toy will need to reset it by firstly switching the unit off, then hold the transmit button and the volume UP button while powering the unit on. This will reset all the functions of the unit back to the factory default. If you still have problems then the unit is faulty and needs repair or replacement.
Iwant to clean a KENWOOD transceiver circuit board what strips the coating off
Hi,Warning!!!! Be very, very careful, this is not recommended if you have never done this before, and from what you have posted here, then you obviously haven't. I advise you very strongly not to do so as this could result in component or even board failure.This task is best left to experts in the field to do, if in fact it needs to be done at all.This is my strong advice.Cheers,Peter
Kenwood K1 plug diagram
https://www.google.com/search?q=Kenwood+K1+plug+diagram&client=firefox-a&hs=XBv&rls=org.mozilla:en-US:official&channel=sb&tbm=isch&tbo=u&source=univ&sa=X&ei=PjphU9y8GsH68AG_u4HQDQ&ved=0CCcQsAQ&biw=1280&bih=595
Need codes for kenwoon tk2212L-1 scanner
TK2212 is a Portable 2 way radio not a scanner. What is it that you are trying to do with the radio? What codes are you talking about? If you are trying to program the radio you will need software and cable that is available from a Kenwood dealer or sometimes you can purchase the cable on Ebay and get the software from someone on Yahoo user group "Radio programming"
Not finding what you are looking for?