LeapFrog LeapSter L-Max Console - Answered Questions & Fixed issues
Pink lmax does not work
Have you followed up all the OM instructions (e.g. full charge, how to turn on very first time, etc.)?
1/25/2018 11:33:56 PM •
LeapFrog...
•
Answered
on Jan 25, 2018
•
92 views
LeapFrog LeapSter L-Max Console turns on and you
probably broken I don't use leapster so I don't know I would call the leapfrog company and see maybe its defective or the batteries I know when we doesn't read the disk somthings wrong my wii actually broke and when ps2 doesn't read the disk its broken trust me hon I know about games and stuff I tend to troll on some online games im bad well hope this helps
2/13/2014 2:22:34 PM •
LeapFrog...
•
Answered
on Feb 13, 2014
•
110 views
Water damage dropped
try the good old rice trick take the batt out place the device in a zipplock bag with plain old rice let it sit in there for a good day or two the rice absorbs the water from inside the device safest and best way works for other electronics too
9/23/2013 4:08:40 AM •
LeapFrog...
•
Answered
on Sep 23, 2013
•
85 views
My game only works when on charge. When the
- That blinking green light means the rechargeable batteries are no longer holding a charge which is also why the unit shuts down when the power feed is removed. You just need a new set or rechargeable batteries is all. 4 AA (or LR6 depending where you are)
- Please note that when the charger rapidly blinks green, in addition to the batteries that are failing, they can overheat and leak. Please, cease to use those batteries and take them to a recycle place before they begin to leak from trying to charge when they are not safe to charge anymore.
- If you have any comments please feel free to leave them here.
- Hope this helps and thank you for using FixYa.
Regards,Tony
10/5/2011 3:19:47 AM •
LeapFrog...
•
Answered
on Oct 05, 2011
•
906 views
I have an original leapster
There is no definitive way to check if your battery will hold a charge besides actually using the device itself.
6/13/2011 2:41:12 AM •
LeapFrog...
•
Answered
on Jun 13, 2011
•
723 views
The touch screen no longer
Likely, yes. call leapfrog, and ask. However, most warranties do not cover abuse or accidents. If your grandson did something or dropped it, the warranty will not cover that.
5/20/2011 5:33:38 PM •
LeapFrog...
•
Answered
on May 20, 2011
•
174 views
I have leapster l-max and
Leapster L-Max recalibrates differently. I was trying to use the instructions and it kept asking for a blue button. For the Leapster L-Max push B, A, Hint, and Home when you turn it on. Do not have a cartridge in the player or it will think it is a regular Leapster. Once it says calibrate screen it will say to press A, then wait until a target appears in the upper left hand corner, touch it and you should hear a sound, then a new target appears in the lower left hand, repeat actions, then lower right hand screen, and finally the upper right hand screen. If it stops at any time and doesn't get more arrows, try it again or turn it off and see if the pen works. It may take several times to get it working again.
4/15/2011 6:52:00 PM •
LeapFrog...
•
Answered
on Apr 15, 2011
•
271 views
When my daughter touches any object with the pen
You need to recalibrate. Try pushing B, A, Hint, and Home when you turn it on. Do not have a cartridge in the player or it will think it is a regular Leapster. Once it says calibrate screen it will say to press A, then wait until a target appears in the upper left hand corner, touch it and you should hear a sound, then a new target appears in the lower left hand, repeat actions, then lower right hand screen, and finally the upper right hand screen. If it stops at any time and doesn't get more arrows, try it again or turn it off and see if the pen works. It may take a few tries to get it to recalibrate correctly.
7/24/2013 1:36:40 PM •
LeapFrog...
•
Answered
on Jul 24, 2013
•
326 views
Turns on for 2 seconds then turns off
Mine was doing the same thing. Solutions is taking out the SD card. Worked after that. My wife had downloaded something new on it and that is when it started.
12/24/2010 1:38:39 PM •
LeapFrog...
•
Answered
on Dec 24, 2010
•
1,420 views
Water damage to leapster2 hand held game. will
Im sorry but water and eletronics dont mix somthing problay short circtued you might want to get a new one because i can think of any of my friends who fix these things and i have ALOT of friends
An just curious and it would help how did it get wet
10/16/2010 2:13:40 PM •
LeapFrog...
•
Answered
on Oct 16, 2010
•
553 views
Our leapfrog 2 console got
Yes all you have to do is (first of all check the batteries) find out whitch parts of the console is not working (I don't know how sorry about that) and replace it. Wish i could be of more help. maybe try going to the
LeapFrog LeapSter L-Max Console website
10/1/2010 1:04:08 AM •
LeapFrog...
•
Answered
on Oct 01, 2010
•
336 views
How can i get a new stylus for leapster 2
If you need a replacement pen, with the cord attached, follow the instructions:
Send $5.00 in check or money order (to cover shipping and handling charges) to
LeapFrog Customer Service
Leapster Replacement Stylus
563 North Fairview Street
Santa Ana, CA 92703
Please note that this is supposed to be for pens that are lost or damaged ONLY.
3/25/2010 3:49:12 PM •
LeapFrog...
•
Answered
on Mar 25, 2010
•
434 views
Screen stays black
Its either your screen maybe damaged or there is a backlight on the screen that you turned off. Hope that helps.
2/17/2010 1:23:03 AM •
LeapFrog...
•
Answered
on Feb 17, 2010
•
322 views
Not finding what you are looking for?