2003 RM 250 THE BIKE HAD 15-20 HOURS ON IT FROM NEW.I THEN DID A TOP END JUST RINGS.I BROKE THE NEW RINGS IN AND I PUT 8 HOUR MORE ON THE BIKE AND SHE LOCKED UP.AFTER A NEW CYLENDER AND PRO X PISTON ...
...gap with ring keeper pin...also, pay attention to orientation...some have an angle on the upper side of the ring. Install one of the circlips, rotate it so the gap does not line up with the hole, gap ...
Question about Bajaj Motorcycles
...ring gap will denote if standard , worn or oversize to standard new rings in new bores will have a ring gap of around .010" worn rings will have a larger gap up to .040" and will have sharp edges ...
Question about Honda Motorcycles
...ring gap on a 2001 Honda cr80 motorcycle I just need to know how much to gap it can you help? Thankyou ring gap is checked at the bottom of the cylinder and is normally .010" minimum to .025" max ...
...ring gap should be off set to each other and generally placed between 20-25 past and 25-20 to [like a clock] but no where near the side of piston at little end pin.also use a little oil in grooves to ...
...nrg keeps on braking pistion rings why when you put in your new rings make sure you check the ring end gap if the gap is not right it will not lube the rings properly thus ending up with broken ...
...gap in the ring. Anything more than 1/16" and you need rings the next size up. If the ring won't go into the cylinder because the gap fully closes, the rings need to be a smaller size. With the ...
Question about Suzuki RM 250 Motorcycles
be either a chrome ring or moly coated ring. Make sure you check the end gap clearance on the rings and do not align the end gaps, stagger them around the piston. The darker one goes below the top one
Question about Motorcycles
...ring gap is what is important and it should be around .003" per ever 1" of bore so for a 3" bore the gap should be around .010" experience has proved that if the cylinder is bored to say .020" ...
oil in head, fouling plug bike is using way too much oil, it blows white smoke . thought it was oil ring so I had the dealer mike the barrel & it was good so I put new piston & rings 300 miles
48 questions posted
Usually answered in minutes!
158 Questions
28 Questions
0 Questions
2 Questions