2003 kawasaki KX 125 "clutch" Questions

Ad

Question about kawasaki KX 125 Motorcycles

2 Answers

2003 KX125 Clutch Problem I have problems with my 2003 KX 125 clutch. When releasing the clutch lever, the bike jumps forward............. in other words, the clutch doens't release slowly and ...

Ad

Question about kawasaki KX 125 Motorcycles

1 Answer

1999 Kawasaki KX 125 the clutch will not engage the clutch on 99 kx 125 is not engaging, cable properly adjusted but it seems as if I have too much back n forth movement in sprocket.. ~HELP~ @ Hi, ...

Ad

Question about kawasaki KX 125 Motorcycles

1 Answer

1991 Kawasaki KX 125 clutch hard to disengage not clear on the function of 91 kx 125 @ Hi, Chris and the usual suspects are: 1. Clutch cable bent, kinked, pinched, rusted or needs lubrication. 2. ...

Question about kawasaki KX 125 Motorcycles

2 Answers

1987 kx125 clutch wont engage bouthg this bike used eith this problem no matter what you do the clutch wont release. with lever fully pulled its still in gear i have replaced the cluthes and steels. ...

Question about kawasaki KX 125 Motorcycles

1 Answer

...something inside not working Remove the right side cover and check the operation of the side case clutch lever by looking at it from the inside. If it is operating freely and the cam on the arm

Question about kawasaki KX 125 Motorcycles

1 Answer

i need to know how to remove lutch from kawasaki 65 1- Remove nuts, clutch spring plate and springs 2 Feed a rolled-up rag between both primary reduction gears to prevent the clutch from turning, then

Question about kawasaki KX 125 Motorcycles

1 Answer

my clutch doesn't engage all the way. i can't kick it in gear while holding the clutch. i can't sit with it in gear while holding the clutch. try adjust the clutch at the lever if that doesnt work the

Question about kawasaki KX 125 Motorcycles

2 Answers

clutch slipping when i pull out clutch engages but bike dont move very fast and the engine revse high do i need new clutch this is a 89 kx 125 Clutch plates are probably toasted. Drain the oil, remove

Question about kawasaki KX 125 Motorcycles

1 Answer

the clutch will not spring back after you pull the clutch handle Unhook both ends of your clutch cable if it is binding at all replace it. If the lever on the motor does not go all the way back to ...

Question about kawasaki KX 125 Motorcycles

1 Answer

How do I install the clutch release shaft on a KX 125? I have a 2003 KX 125 and I was replacing the clutch cable when the clutch release shaft came out slightly and would not go back in place. I am ...

Not finding what you are looking for?
2003 kawasaki KX 125 Logo

326 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5860 Answers

Marvin
Marvin

Level 3 Expert

84625 Answers

richard libby

Level 2 Expert

202 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...