2001 kawasaki VN 1500 Vulcan Classic "starting fluid fuel injection engine" Questions

starting fluid sprayed to intake Sounds like you're not getting fuel for some reason. If your bike is equipped with a carburetor, the fuel petcock may not be opening properly. In 1996, Harley went

starting fluid" sprayed into the airfilter will help determine if this is a fuel problem or an ignition problem. If you can locate the air filter and feel confident enough to do this...pull the needed

fuel injection have just Have S1 Lightning 2000 fuel injection, have just bought, its been standing 6 years. I have taken the petrol tank off, and drained the fuel out of the filler cap, it won't come

...starting fluid in the carb. Fuel pressure regulator? Where is it located? Where is the fuel filter located? Engine The Honda VTX 1800 cruiser boasts a monstrous 1,795cc liquid-cooled V-twin engine, ...

...fuel pump not operating. No power to pump. Pump relay tests ok with meter check. sprayed stating fluid in throttle body. It kicks and tries with fluid or gas. Security light on dash. many various ...

...fluid reservoirs haven't leaked and there is no fuel in puddles around the machine. If all of this is good and the engine oil level is good, then just start it. It may take a couple of tries to get ...

...starting fluid on the intake manifold where it bolts to the heads with the engine running and fully warm. If the RPMs either increase or decrease then you have an intake leak. It could also be that ...

...Fuel Injection System. Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs -fluid capacities and a wiring diagram on the back pages, parts fiche, and ...

...the fuel pressure but cannot find a test port. Any suggestions? James Take the air cleaner off ,spray alittle starting fluid in the intake and see if it starts if it starts test cam and crank ...

...FUEL TANK UP WITH SOME INJECTER CLEANER AVAILABLE FROM ANY MOTOR *** SHOP AND RUN THE ENGINE. IF IT'S AS BAD AS YOU SAY YOU MAY NEED TO USE DOUBLE OR TRIPLE STRENGTH. IF THAT DOES NOT WORK TRY ...