Question about kawasaki ZX-6R Ninja Motorcycles
...earth, check the earth lead terminal from your battery see where it terminates it might need sanding up a bit , the reason for your tank becoming live is that it is bieng fed by a live feed ...
Question about kawasaki ZX-6R Ninja Motorcycles
...fuel line. Check for spark. If no spark then check again with a new plug. Is the kill switch on? Does the side stand have a kill switch? Is it working properly? Tip-over kill switch on your bike? ...
...in the sand. The Fuel Filter Use an in-line fuel filter or, if you already have one, change it frequently. This will keep fine debris from the sand from entering the engine through the fuel
...fuel tank, apply only one coat to tank lightly wet sand the tank paint the gold and black striping on the tank, don't have any stickers and paint is thinner apply 3 medium coats of clear to the ...
FUEL RATIO what fuel ratio should i mix for my bike reed power 3 ND FMF FULL EXHUAST I AM USING BELLRAY IOL? For motocross racing..50:1 gas:oil mix. For trail riding and sand pits,..try 40:1.
...note if the pump sounds louder indicating working harder which maybe caused by clogged fuel lines, fueltank/petc0ck filter, sand/dirt or running out of gas. Good luck and thank you for asking
...sand/debris would have been sitting peacefully at the bottom of the tank but has been agitated and made to flow with the last few fuel left. of course, the correct action would be to dis-assemble and ...
...sand lodged in the fuel inlet valve. Often this fuel inlet valve is a pin with one end pointed (sometimes rubber) and is controlled by the float.A seized starter plunger would have to be replaced. ...
...sand on left side. it ran afterwards one time and now won't start. we think it is getting fuel Pull the sparkplugs. Are they wet? If so, flooded is correct. Crank while plugs out. Getting spark? No ...
Question about kawasaki ZX-6R Ninja Motorcycles
...fuel inlet valve problem. This would require a carb pulldown for cleaning and soaking in carb cleaner non-rubber parts. In sone instances, dirt, sand or foreign matter would wedge itself on the inlet ...
119 questions posted
Usually answered in minutes!
157 Questions
84 Questions
79 Questions
51 Questions
51 Questions