Question about kawasaki ZX-6R Ninja Motorcycles
...ignition or a wire leading from the ignition be my problem?? Hi and welcome to FixYa, Initially, check: black wire from the ignition coil that goes to the CDI; check the terminal/pin of the black ...
Question about kawasaki ZX-6R Ninja Motorcycles
... Coils get 12 v. it seems that cdi is working as griund seems to be cut when trying to star. I have checked the plugs against motor and frame. check your spark plugs leads the CDI unit need to be ...
...not beyond was missing ignition switch Hi and welcome to FixYa, Depending on the version, initial check would be for IGN +12 on the yellow/red wires of the ignition coils and pulsating voltage on ...
...CDI would be the main suspect. Since the CDI is sealed, it is not possible to do component level checks. The only way to check if the CDI is good is to check the external connections; if they are ...
Question about kawasaki ZX-6R Ninja Motorcycles
...the spark plugs? any help would be very gratefull thanks. If you have power to the coils have you checked that it is 12volts ? If so then for some reason the Igniter is not switching the ground to ...
I have a 1992 kawasaki ninja 600r.I have been experiancing missing problems,i have changed plugs,wires,coils tested good.I was checking to see if i have inductive ignition or cdi ignition.I have 12 ...
...float stuck. 11. Fuel injectors clogged. 12. Fuel injectors stuck open. 13. Quick disconnect check ball stuck. 14. Compression below 75 PSI. 15. A stuck-bent-burnt valve. 16. Severely ...
Question about kawasaki ZX-6R Ninja Motorcycles
...lights come on when I first put the ignition on. Was wondering if it could be as simple as a fuse? Check the
119 questions posted
Usually answered in minutes!
157 Questions
84 Questions
79 Questions
51 Questions
51 Questions