how do i remove the carbs from the engine? After removing the tank and airbox, loosen the clamp screws securing each carb to the inlet stubs, these can be sometimes difficult to get at and time ...
Question about kawasaki ZX-6R Ninja Motorcycles
one carb does not want to fuel on low revs ie remove plug lead from good pot on low revs it stops remove plug lead on good pot with revs it wiil run remove bad plug lead on low revs makes no change to
Question about kawasaki ZX-6R Ninja Motorcycles
The best way to remove a carb from a 1994 ninja ZX-6 and the tools required. Ok you will have to remove the seat and the fuel tank. You will need metric wrenchs and sockets and a stanard screw driver ...
fuel coming out of my over flow clear tube on to the ground on idel One of the carb floats is stuck open by sone trash in the carb. Remove the float bowl, float and float needle then use some spray ...
how to clean a carb on 2001- zx12 it wont turn over i have reason to believe that it is the carbrureater remove the carb cover buy a carburetor spray run the engine and puff the carb cleaner to ur ...
Question about kawasaki ZX-6R Ninja Motorcycles
i just purchased a 2001 zx6r and i put 1/3 seafoam and 2 gallons of fresh premium gas. carbs were cleaned 2 years ago. when i run it the rpm will get to about 6 or 7000 rpms but it dies out if you ...
Carb needs cleaning I Need to know how to get to my Carburetor properly and clean it as my bike won't start properly, it tries and back fires but wont run. which is the correct procedure to get to the
Question about kawasaki ZX-6R Ninja Motorcycles
.....what could be the problem.. hi, this is almost certinly a float valve not closeing,removal of the carbs, careful strip down and clean, only the lower of the carbs must be dismantled for this task, ...
1986 Kawasaki Ninja won't fire I have a 1986 Kawasaki Ninja zx-6 with a 600cc 4cyl 4carb motor. The bike sat for about a year before I bought it to fix it up. I removed the carbs and cleaned and ...
My '95 ninja is idling to low (around 850 rpms...) and will sometimes die while downshifting approaching a stop, how do I adjust the idle speed? You have to remove the seat, and loosen the tank to ...
116 questions posted
Usually answered in minutes!
157 Questions
84 Questions
64 Questions
51 Questions
51 Questions