1997 kawasaki ZX-6R Ninja "cam chain" Questions

a knock that goes away when i accelerate sounds like you need a new cam chain tensioner.

...cam chain on my kawasaki zx6r g1 1998 ninja.how is this done? and how can you make sure timing does not slip out of alignment? Cam chain replacement is a bit complex for a beginner. I don't recommend ...

chain keeps jumping teeth when cam caps are bolted down Get your self a manual, there are plenty available, either freebie (hunt around) or pay eg Ebay. But I think your problem is beyond the scope of

cam-chain between the inlet cams IN mark & the Exhaust cams EX marks, make sure that all the slack is taken up on the rear run & that there is none at the front or between the camshafts: There

...cam chain is worn/stretched, it needs to be replaced. Here is a direct quote from the manual: "Measure the amount of the cam chain tensioner projects as shown (there is an illustration). Replace the ...

...Cam chain tensioners pretty sure its the cam chain tensioner springs. lost their spring If its been making this noise for a while what else would i need to replace. cam chain? tensioner springs? cam ...

cam chain on 09 CRF 450. It seems that I don't enough slack in the cam chain to fit it around the camshaft sprocket. check that the new cam chain is roughly the same length as the old one, ensure that

Cam Chain Bike is a 1996 ZX6R. Cam chain is very noisy. Removed tensioner and it seems to work fine. I saw manual adjusters on ebay. Is there more adjustment in a manual one? Could I get the seaon out

...cam/chain tensionor has gone bad, is it possible that the chain is just not lined up properly and just needs to be "re-aligned"? how easy is it to replace the cam chain tensionor? from what i have ...

...cam chain is rattley how do i tighten it ive a 89 zxr 400 There is a cam chain tensioner on the ZXR 400. It sounds like you need a new cam chain.Important Note: The cam cahin tensioner is held on by ...