2003 Kymco Venox 250 "ignition trigger" Questions

Ad

...A rectifier inside the charging circuit prevents the capacitor from discharging before the ignition point. When the triggering circuit receives triggering signal, the triggering circuit

Ad

...triggers spark? Van won't start. Engine got hot but not seized. Suspect cooked cam or crank sensor. Ignition module good / new. Checked all cylinders with timing light and getting erratic spark. The ...

Ad

Question about Kymco Venox 250 Motorcycles

1 Answer

...trigger and vice versa. If there is voltage for both replace CDI box (but be cautious to verify good ground for CDI box and ignition coil). If you find voltage out of your CDI box (over 100V) replace ...

...ignition unit to the power source, the trigger coil has continuity and the ground and other connections are sound. If all seems ok then replacing the ignition unit seems the obvious next step, though ...

...ignition trigger unit? Please. Common fault is for metal particles to cause a short at trigger unit -- I want to access it to clean it. Please elaborate as to which motorcycle you are asking

Question about Motorcycles

1 Answer

...go to low so as to trigger the coil to output the HT and this firing comes from the ignition unit., If this is absent it can also be failure of the unit or loss of trigger pulse from the

Question about Kymco Venox 250 Motorcycles

1 Answer

fire to the plugs ninja 500ex You need the stock ignition switch in order for it to trigger a relay inside the igniter, then it will spark, this is part of Kawasaki's anti-tamper proof ignition system

Question about Kymco Venox 250 Motorcycles

1 Answer

for cam timer the sportster 883xlh, year 1995 if you're talking about the sensor that triggers your ignition, we call it the "Ignition timing sensor". It is triggered by a cup with small notches in it

Ignition Coil Peak Voltage (static) should be 132 to 198 volts. I have 340 colts. I read online it could be the pulsar/trigger coil. I don’t know what that is unless it is the magneto trigger, and the

Question about Kymco Venox 250 Motorcycles

1 Answer

need to trace the voltage to the coil, the trigger voltage if absent then the ignition system is defective. Check the input and also the 12 volt to the coil , if coil is heating it can be faulty. 

Not finding what you are looking for?
2003 Kymco Venox 250 Logo

29 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Kymco Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Brad Brown

Level 3 Expert

19187 Answers

littlewheel

Level 2 Expert

122 Answers

Are you a Kymco Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...