Troy Bilt Pony 6.5 Hp Rear Tine Tiller "mtd tine tiller gear" Questions

...MTD Yard Machine rear tine tiller Model 410 and when I went to use it this year when I put it in gear the tines did not move. I called the MTD tech and he said it sounds like its in the transmission ...

...Tiller starts up on the 1st pull & runs great, the the tines ONLY turns very slowly, even when the trottle control is pressed dowm, i also lubricated the gear box, the tines turn but not fast ...

MTD rear tine tiller series 410 drive wheels slip out of gear. When I release clutch handle and reengage it it will work again foe a few seconds. I completely dissasembled the gear box and repacked it

mtd rear tine garden tiller . The wheeles will engage and turn forward and reverse but the tines will not engage. At first they would but would pop out of gear. Now they w9ont engage at all. Could be ...

...gear pointer doesn't the cluch doesn't work. The gear pointer doesn't activate the desired position: reverse,forward,etc. Do you have a model number? Front tine or rear tine? I will try to help

MTD yard machine model#216-410-000 Everything works, but tines won't turn. What do I do? either your tine shaft is seized to bushings which requires total dissassembly of unit or you have a failure of

...mtd rear tine which blew the entire bearing box for the second time. The times should have little to no flex when push or pulled. Fortunately, MTD came good for the first rebuild even though my ...

MY ROTOTILLER RUNS AND DRIVES BUT THE TINES WONT TURN Make sure that the clutch doges as I call them are engaging properly. Also check rear tine gearbox for striped gears or sheared keys. To check ...

...MTD rear tine garden tiller that has stopped pulling. It will pull for awhile and then it stops. I can push on the tiller and it starts pulling again but will soon stop. engine oil is sae 30 the the ...

...mtd when tine are in reverse it will jump out of gear check the linkage for play and make sure its adjusted to go all the way into gear they will jump out of gear if its not going all the way ...