Samsung LN32A330 32 in. LCD TV "fault finding picture" Questions

...picture and sound. I let it run awhile then switch back to line 1 and tv works, until you turn it off and then turn it back on again the next day. Sounds like backlight inverter board fault. If you ...

fault in lcd panel of your tv. which may be diagnose only after seeing exact condition of picture. I need to increase the brightness on my Sanyo DP26649 TV. The problem is I do not have the remote. Do

...fault. If it has sound but no picture then one of the following parts is faulty, and must be tested and replaced: Theinverter is the high voltage board that provides variable power to thebacklight ...

...picture... well the pink/green ****) I've been checking some info out and have found that there are 3 readily available parts that can be replaced... the T-CON board, the Main board or the power ...

picture. I still have sound, Popped the back off there are no popped capacitors, any clue? Hi, sorry to hear you didn't prevail, i have been doing this for over 30 years and some still stump me... But

...if the cap feels buldged than this is the problem It seems that your unit has some sort of PSU fault, or a problem that is shutting down the Power Supply Unit, PSU. This happens so that no ...

...picture You have a fault in the main board for sure but many inputs are requried to find a solution when there is no pitcure. so check the powerr to the main panels the drive board, If ok then the ...

...picture then it is likely a T-con fault - this is a small board positioned in the middle of the TV usually near the top. Once again get the part number and find a replacement. If the screen lights up ...

...FAULT ,WHEN TURNED ON I GET HORIZONTAL LINES OR LINES WITH A PICTURE AND SOUND.COULD THE T-BOARD BE THE PROBLEM.THANKS. i took the back off to have a look but did not find any thing,i unplugged and ...

...picture then it is likely a T-con fault - this is a small board positioned in the middle of the TV usually near the top. Once again get the part number and find a replacement. If the screen lights up ...