Bunn VPR Coffee Maker "replace switch plate warmer" Questions

...switch the warmer plate on I've looked at some other coffee makers being shown on YouTube were they can set the warmer plate timer to zero so the keep warmer plate doesn't come on is there a setting ...

...switch is on but warmer plate is cold, Is it replaceable or should I send the whole coffee maker back to Bunn for repair??? If you will call customer service at 800-352-2866 with the model and date ...

...switch for each 'side' warmer plate. Turn them on or off as needed. Note; try not to leave a brewed coffee pot on heat longer than 45 mins. Transfer brewed coffee to an 'Air pump" pot or similar ...

...switch is cheap and can be obtained from some appliance supply shops but I would take the defective one with me to be sure to get the right one. It would be easier to replace the warmer or try the ...

...plate actually boils the coffee after it is brewed. We switched the upper and lower warming plates with the same results. What can I do about this? You can either replace the warming element with a ...

...switch on when the dial is turned clockwise. Then it's open. Need to replace. * Okay final note; I'm guessing the real question here is what the wires look like in the real brewer and not a bunch of ...

...plate) that kills the sensor. Both have to be replaced, however, are they easy to find and worth the cost of parts and time to repair?? Or just buy another one. The life expectancy is aproxiamate 500 ...

...replace back in the brew hat. 30) Clean the pot, pot lid and brew basket. 31) Wait ten minutes for the water in the tank to boil. 32) Brew your coffee as you normally would. The only issue I ...

plate works, it is the heater on the inside that is not working. How do I fix it? You can check to see if the switch on the side of the tank is turned on and is working, but if the problem is with the