...plugged up in the rubber tubing. Usually you can just blow through it with lung power. Just pull the tube off at the nozzle and run the washer this will tell you if it's the nozzle or the tubing. ...
...is good flow of fluid. If there is, then your nozzles are plugged. You may be able to clean them out with some air pressure. Careful working with the nozzles, as they are plastic and break easy. ...
...plugged up.OR the hose fell off the bottle and the bottle is empty. You can use a small wire from a wire brush to un plug the squirt nozzles on the hood.Use pliers to feed the wire into the ...
...clean out the nozzle with a single strand of wire from any piece of old wiring you have lying around (except household lamp cord as the strands are too thin). If no fluid comes from the hose, ...
Question about Honda Accord
plugged up, because the opening is much smaller than the tubing. Even though the pump is operating, does not mean that it is actually pumping any fluid. The pump assembly is electrical and mechanical.
1,994 questions posted
Usually answered in minutes!
2,998 Questions
2,681 Questions
1,631 Questions
1,636 Questions
1,570 Questions
