...reset the computer after installing the new coil? Culprit, "now" has to be only one thing I can think of. the "computer" or the fuse that might be in place for that coil. If you have spark on the ...
how do you reset the computer? remove the EFI fuse few seconds, located in fuse box under hood
Reset the computer on 1998 Lexus LS 400? try disconnecting the battery and joining the leads together overnight ,if that doesnt work then i do not know only to suggest the dealer
...reset . The engine control computer turns on a series of two different relays to control power to the fuel pump. When in the start position the circuit opening relay and the fuel pump relay or both ...
...bulbs and they are working fine. I removed the neg anode on battery and reset the computer, but the warning light wont go out on my dashboard. are you using same ampere bulbs for all lights ...
...reset the brake wear light after new pads are installed? you do not have to touch it ,once the wire is pulled out then their is no contact to earth so it should go out ,unless its connected via the ...
Question about Lexus LS 400
...1999 Ls400 it's cranks but won't start. It was running fine and then out of nowhere won't start up Reset the ...
...reset the computer by disconnecting the battery for 10 minutes. started the car and no change.after i found out my timing was a litte off i decided to change the timing belt & cleaned the cam & crank ...
...if there is a way to reset them Try disconnected the battery for 10 minutes then reconnect that will reset computer, if that does not work then a short is likely in the instrument panel ...
...COMPUTER AND IF COULD BE RESET It is recommended that the engine ECU is reset after any engine performance modifications have been made to the vehicle, including using a higher octane fuel, to ...
394 questions posted
Usually answered in minutes!
531 Questions
242 Questions
176 Questions
155 Questions
93 Questions