2002 Jeep Grand Cherokee "flexplate replacement" Questions

a used part you will need to get a spacing shim that sticks to the end to correctly space it to the flexplate. Otherwise a new one should just unbolt and go right back together

...replacement. Where can I find one? car_parts.com can probably get you the part. I would be more suspicious of the Crankshaft position sensor. In my experience, PCM on chrysler vehicles are very ...

...worse. once per 10 starts. starts on third try. It sounds like the gap between the starter gear and flexplate is growing. The ring gear may be worn out in spots causing the starter not to engage the ...

describe how to fix a flexplate that is rattling and hitting against the starter. I was told it is cheaper to get a motor. Is this true? If not, what will be a quote to get it fix? You have to remove ...

How to remove the flywheel on a Buick rend http://www.carrepairpro.com/2012/03/how-to-replace-flexplate-on-buick.html Solved How to replace Flexplate on Buick Rendezvous

...tested it. it spins but will not engage. Sometimes the starter will really mess up the teeth on the flexplate/flywheel. Try spinning the flexplate or flywheel a lil to get to some fresh teeth. There ...

flexplate replacement can you just slide the trans back to replace flexplate ? yes you can. it will not give you much room . but you can do it good luck you would need to slide it over farther than ...

...and I replaced the starter. The old starter's gear's teeth were worn down so I am assuming the flexplate is bad since I put a new starter in and it still won't start. How do I replace the ...

new starter but sometimes grinds when starting This is caused by damaged gear teeth on the Flywheel/Flexplate, the new starter will be damaged if you don't replace the Flywheel/Flexplate

and trans,driveshaft,brakes. Truck performs perfect.Sounds horrible. Any clues would help Check the flexplate for cracks.If you see any cracks replace the flexplate