2003 Dodge Durango "howling front car" Questions

...TURN COMING FROM LEFT HOWLING NOIS ONLY ONE RIHGT TURN COMING FROM LEFT FRONT sounds like a wheel bearin if turn to one side or the other, jack it up and see if any play in wheel from top to ...

...howling noise in the front end. It's not really bad but is noticeable. I had a flat tire a couple of weeks ago and it seems much worse since replacing the tire. Is this something I should ...

...howling noise starting about 35 mph and gets louder the faster you go? Mechanic is sure the sound is coming from the right front, he tried new Hub Assemble...still howls. Tried new 1/2 shaft...still ...

howling noise in front wheels Hi, A brief history of recent problems. Four to five months back bearings in both the front wheels broke and were replaced after using the vehicle in the broken condition

...front differential fluid is silvery even right after I change it. There is a howling noise upon acceleration. Seems to howl loudly when I am accelerating. Quiets down when I let off the gas. Sound ...

...HOWLING WE CHEKED BOTH FRONT WHEEL BEARING AND AXLE HANGER BEARING NOISE STILL THERE NOT A TIRE ISUE ALSO IT IS A ALL TIME 4WD Did you check your Transmission fluid and your differential fluids make ...

...howling I have a front wheel drive and at 120k I had noise in the back. It turned out to be a bad wheel bearing. It was tough to diagnosis because the quick check is to see if the wheel wobbles when ...

howling noise coming from the front of my 2003 yukon denali, it only makes the noise when i let off the gas pedal check the gear oil level in the front diff asap. Howl usually indicates a very low ...

...howling for an hour and a half yes it is the door seal definitely. check the window was fitted closed, & check also the alignment of the door., if you think it was not the gasket, but if the door / ...

howl in left side of wheel while driving ,in nuetral also, there is a howl in front left side and when jacked up, there is movement in the ball joint when rocked and noise when spun manually think u ...