1981 Chevrolet Corvette "causes key ignition car" Questions

Ad

...key will not come out of the ignition, any ideas what this could be? Hello You will need to get a new ignition because I believe that one of the inside tumblers have fell Causing the key to be stuck

Ad

key-way/switch. The 10 min wait you do is a by pass measure. It is a pain in the *** Camaro had the same issue. The contacts in the switch pickup wear, that causes a miscommunication with the bcm that

Ad

Question about Chevrolet Corvette

1 Answer

...Ignition Key, but if it does not reset, most likely the Ignition Lock Cylinder has failed. It has small contacts which 'sense' the pellet on the key and transmits that data to the Anti-theft Module. ...

Question about Chevrolet Corvette

1 Answer

key off it fires one cylinder what would cause this Ignition switch,bad fusible links, coil,ignition module. I have replaced several switches for this problem. At the coil, when you turn the switch on

...system... If the security light remains on while cranking then 90% of the time it is caused by a broken wire coming off the ignition key lock cylinder. This repair should be done by a

Question about Chevrolet Corvette

1 Answer

ignition key to the "on" position you might try disconnecting the electrical connector to the fuel pump and turning the key to the "on" position. If the fuse still blows there is a short in the wiring

...ignition fuse.I turned the key to acc to see if the changer would come on. Now I finished and when I tried to start the car it won't make a sound. The lights radio and fan come on and the gauge shows ...

...key out. Push off and fan goes to defrost. I'm assuming controll panel. Any thoughts???? It's a defrost bypass valve that redirects the freon to releave the high head pressure caused by shutdown.When ...

ignition control module, coil, magnetic pickup, and the rotor button. please help me fix this car!! 38 lbs is not enough fuel pressure. replace the fuel pump If you have a scan tool you should monitor

...key was turned off. Will only start again if allowed to cool off. Just replaced ignition module, same problem. All other components of the ignition system harness, coil, wiring, distributor ignition ...

Not finding what you are looking for?
Cars & Trucks Logo

256 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85178 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22484 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...