2000 Chevrolet Silverado 1500 "rear axle" Questions

Ad

...rear axle seal on a 1999 chevy Silverado? Watch the You Tube Video Remove the rear axle cover Remove the carrier bolt & pin Push the axles in Remove the C-Clips Pull the Axles R & R the ...

Ad

...rear axle had drum brakes now have disk brakes and abs and brake light warning comes on check to see that the sensor wires that sense axle rotation are connected. Some are near the caliphers abd read ...

Ad

Question about Chevrolet Silverado 1500

1 Answer

Rear end wine - 2000 Chevy K1500. Sounds like the axle bearing but not 100% sure. Never replaced bearings in the rear before - not sure what I might be getting in for. First check level of oil in rear

Question about Chevrolet Silverado 1500

1 Answer

...rear axle is leaking. I need to know how to adjust the shims on the ring in pinion ? well if the axle is leaking you dont need to adjust the shims, it needs a new seal. pull the brakes off open the ...

Question about Chevrolet Silverado 1500

1 Answer

rear end axle removal for a 2000 chevy truck 1500 You must remove the rear cover on the differential and then the spider gears, then the center pin bolt and the pin then push in on the axle and remove

Question about Chevrolet Silverado 1500

1 Answer

axle's you have to remove the rear cover first. Inside you'll see a pin between the axle's. remove the bolt that hold's the pin in.it takes a 5/16 or 8mm socket.after removeing bolt pin will slide out

Question about Chevrolet Silverado 1500

1 Answer

...rear axle on posi trac 96 Silveradocan not find a c clamp C-Clip on end of axle! Remove the Diff pin,push axles in and remove clips,pull axles. Are you looking for a way to compress the posi clutch ...

Question about Chevrolet Silverado 1500

1 Answer

rear differential and remove the differential cover remove the 10mm bolt that holds the stud in place when you remove the stud the side gears will fall out giving you room to push the axles forward so

Question about Chevrolet Silverado 1500

1 Answer

...rear end fuild....turn one axle till you see the lock screw in the pinion shaft {middle} take lock screw out then rotate the axle till you can pull the pinion shaft out.....then push on axle to ...

rear You will have to pull the axles to remove the backing plates.Loosen the differential cover until most of the fluid drains,remove the cover.Rotate the diff until you can get at the small bolt that

Not finding what you are looking for?
Cars & Trucks Logo

1,733 questions posted

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...