...39;t move gear shift. What39;s the cause? what can I do? The gearshift interlock prevents the shifter from being moved out of the PARK position unless the brakes are applied. The system uses ...
39;t rool away. Move the lever on the transmission and see if you can move it down to low and back to park do this with the engine off. It should be easy to maove with your fingers. If it is abd cable
...move Here's a company that has pages and descriptions of how toreplace the ignition switch on GM vehicles. They are broken down into step by step detailed instructions. Here is alink to that ...
39;t remove a lot of the oil). Pull the old filter off the cap and clip the new one on and replace the gasket on the cap. Put new oil on the gasket and screw the cap back into the engine. Then put the
...move it. It's especially bad in the cold and I have to wait until the car heats up to shift out of park. I was thinking of taking it to the dealership, but I'm on a fixed income. If you take the ...
...39;t go in gear at first it would randomly slip on of 4th gear, then reverse didn't work so I drained and filled with atf and when tried to drive it it would work in 3rd and slip 4th, then it ...
Question about Chevrolet Malibu
...39;t go into gear my 2003 ford taraus shifter moves through the gears easily but won't go into gear Check the Ford website for recall information. There are hundreds of identical postings for ...
Question about Chevrolet Malibu
...39;t come back out. 2000 ford mercury 3.0, shifter wont move. had a fender bender, put it into park and it wouldn't come back out. For car not changing gears it can be shifter assembly issue, ...
Question about Chevrolet Malibu
39;t shift out of park. shifter glides and needle on dash moves there39;s no gears shifting. is the transmission blown? 2000 sable- can't shift out of park. shifter glides and needle on dash
Question about Chevrolet Malibu
39;t fully move when I move the shifter.Pulled into a parking space fine and went to leave,put into reverse and backed out.Then went to put into 1st gear but there was no gears at all. Check the cable
1,655 questions posted
Usually answered in minutes!
1,306 Questions
1,257 Questions
1,094 Questions
1,067 Questions
997 Questions