Question about Chevrolet Cavalier
to start up.it sounds like a spinning in motor instead of the way a starter should sound cranking.no fire at all.help!could it just b timing. Off.help greatly appreciated Absolutely your timing is off
Question about Daihatsu Cars & Trucks
...starter motor back together on my Daihatsu sedan 1993 model but when put battery leads back the starter motor keeps spinning something must be shorted most starters have a solenoid the engages the ...
Question about Cars & Trucks
...starter motor isnt catching flywheel teeth after replacing clutch an getting flywheel skimmed I've got a rb25det with a 20det gearbox. I just replaced clutch an put everything back together. Try ...
...starter. Not even a pucker or a sound like it wanted to fire up. Distributor problem? if so, firing order for 96 5.0? Thanks turn motor to top dead centre TDC compression stroke & make shore disy ...
Question about Cars & Trucks
...starter motor in our ra 2003 rodeo but when trying to put it back together the gearbox will not go back up into the spline. Can't figger out why it won't go back in. I would say the clutch plate has ...
...or battery cables . Do a voltage drop test on the starter circuit . Do you have an know how to use a DVOM - digital volt ohm meter ? How to voltage drop test starter motor circuit Starter Voltage ...
Question about Dodge Cars & Trucks
...motor swap. I got it back together but arcs when I connect battery. Removed fuses and relays still arcs? Check that the wire that goes to the starter. That is the one that carries the most current. ...
...motor in and it won't crank. Put new fuel pump, checked pressure 52 lbs. If you squirt starter fluid or put gas in throttle body, it will crank and run until that gas is burned up.This has been going ...
Question about Chevrolet Cavalier
...motor in my 1970 chevy nova about 3 years ago.It's a 307 V8, he's now in Iraq (due to come home soon) and I want to put it back together before he gets home. I'm not a trained mechanic, but I can ...
...Starter, setup a engine hoist and remove all bolts that holds tranny/motor. Support Tranny and with the hoist having the weight of the motor slowly separate motor and tranny. Once motor is free from ...
1,389 questions posted
Usually answered in minutes!
1,849 Questions
1,641 Questions
1,529 Questions
1,438 Questions
1,339 Questions