1997 Mitsubishi Galant "100 amp alternator fuse blown" Questions

...100 amp alternator choke fuse had blown. I replaced it and as soon as I connected the battery, it blew out again. You have short circuit between battery positive terminal and chassis.Follow a cable ...

...regulator has stopped working 2. Alternator fuse (100 to 120 amp) is blown (at battery post or inside Fuse/Relay box under the hood) 3. Wiring between alternator & battery &/or fuse/relay

100 amp fuse, and does not have a key fob type alarm. The ignition key is a chip key, but the door key is not. We have tried the 15 minute disconnect, and the turning the key in the ignition sequence,

...30 amp and up fuses. You probably have a blown 100 amp fuse. If it is blown, note that this fuse is BOLTED in; you cannot remove it without removing the bolts. check main circuit breaker or ...

...100 amp fuse for alternator (from another vehicle). I should add that dad did a reverse polarity (placed cable wires wrong ends opp/neg and neg/opp) blew out alt. fuse, hence replacement of 100 amp ...

100 Amp fuse, it has probably melted plastic and metal together. Those large enclosed things in your fuse block are referred to by Toyota as "fusible links". Those things are hard to get out when they

...100 amp but can't locate it in box under hood, anything else to check? 1999 lhs 3.5l check the voltage when the is car up and running. it should be 13.8+ amps, when the car is off the battery is ...

...100 amp fuse blown what is going on? thanks The 100A fuse appears to be for the alternator. If I'm looking at the circuit you were referring to it appears the 30A fuse is the power fuse for the door ...

...engine fuse box or on the main red wire from the battery, there will be heat shrink over the fuse on the main line. sometimes 2 one for the main and other for the alternator. check 100 amp main ...

100 amp fuse keeps blowing and alternator isnt working Hi,trying find out a problem with my Mitsubishi ,I was driving along doing about 90 km a hour, when radio stopped working then the A/T light was ...