...ac compressor, and get smaller belt Check with the dealer on that. Sometimes you can if your vehicle and engine came out without A/C as an option. Another possibility is to look for an "A/C delete ...
...ac compressor locked up u do not reroute the belt u buy an ac delete pulley, remove the compressor and install pulley where compressor used to be, contact ford for the pulley. very easy job. You'd ...
Question about Mazda Tribute
...bolt it it in placethird way is to buy a aftermarket ac bypass pulley kit way these work is u remove the ac compressor and bolt the ac bypass in it place it just a pulley with a bracket on ...
AC compressor pulley turns on is frozen up, the bearing can be replaced but you will need to buy the pulley assembly to get the bearing and you will need a special puller to remove the pressed on
...ac compressor to install the pulley in its place http://www.acbypasspulleys.com/cadillac.html You just need to order a belt without a/c and it will be just the right size. You can go to autozone.com ...
...ac with a shoter belt There is a easy way to re-route the belt after the A/C is removed on any 4.6L Due to the idler and tensioner. When the a/c is not running the pulley spins freely anyway. On 99 ...
compressor stays on when the switch is on. The ac clutch is disengaged when the switch is off, but if you turn the switch on (engine off) the clutch locks in. When the engine is running the compressor
Question about Mazda Tribute
...belt...do i have to remove anything to properly install? or do i just take off old bet and put on short belt and crank tensioner the correct way? it seems that the ac compressor pulley is in the
Question about Mazda Tribute
...AC,3.8 engine Dorman Products makes a special bracket & idler pulley assembly for most popular American vehicles like yours. It is installed so that you can remove a seized A/C compressor. Check ...
283 questions posted
Usually answered in minutes!
609 Questions
615 Questions
319 Questions
327 Questions
287 Questions