2006 Mazda Tribute "install new piston" Questions

Ad

Question about Mazda Tribute

1 Answer

...new vcm and wiring harness last year Check these three things in the misfiring cylinder: spark, gas, and compression. One of them is wrong or missing. For spark check the spark plug and wire. Make ...

Ad

...new fluid. The piston will not retract. What is proble Left front disc brake will not retract. Piston stays pressed against brake pads. Recently rebuilt front master cylinder with new OEM parts. ...

Ad

...install new piston with rings the rings will break if you have not remove top ridge.when you install new pistons rings in cylinder bore need oil soak piston ring compressor and cylinder bore. with ...

...install new pads,ratchet brake up by hand. These are Bosch single piston Rears. Thus: Rear left brake caliper piston retracts counter clockwise and the right rear clockwise using a tool with pin ...

Question about Cars & Trucks

1 Answer

...new pistons is to install shorter pistons. These will probably not be designed for the weight or leverage requirements of the rear hatch. I suggest installing a small-link chain on each piston from ...

Question about Mazda Tribute

1 Answer

...Install new bushings to mounting bolt holes in bracket. Lubricate bushings with silicone grease before installation. Install inboard shoe and lining by snapping shoe retainer spring into piston. Shoe ...

install a new oil filter onto the engine. Fill the crankcase with the proper amount and grade of engine oil. Fill the cooling system with a 50/50 mixture of coolant/water. Connect the vehicle battery.

Question about Cars & Trucks

1 Answer

replacing piston rings what procedures neede to change rings Remove engine. Dissassemble. Remove pistons. Install new rings. Reinstall pistons. Reassemble engine. Install engine.

piston ring installation on 96 geo 1.3 liter 4 cyl engine. The new rings on this motor did not come with instructions on how the rings are to be installed.I need to know piston ring gap and wich way ...

...install new seal into the caliper bore 9. apply a thin coat of DOT 3 brake fluid to the piston itself 10. install bottom half the the caliper piston into the caliper bore. 11. install new dust boot ...

Not finding what you are looking for?
2006 Mazda Tribute Logo

283 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mazda Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...