...What are the colors of the two IAT wires in the MAF sensor? I need to identify what each color goes to Blue, Red, White, White/w blk Stripe, and some other color. Which ones are for the IAT
Question about Mazda MAZDA6
...wire colors that control the IAT sensor There should only be 2 wires controlling it but there are 5 on the connection as it controls the MAF and IAT with the sa What color are the 2 wires for the IAT ...
...PCM to MAFS ( MAF ) is Light Blue w/ Red stripe wire The MAF return on the PCM is Tan w/ Light Blue stripe wire The ground ( same as the Charge motion control valve ) is Black w/ White stripe
...iat is part of the maf sensor located in the air filter duct or housing. 6 pin connector. pin one color violet/gray is for iat. pin 2 is c-signal rtn yellow/violet. pin 3 maf yellow/violet. pin 4 maf ...
2011 mitsubishi eclipse maf/iat wire color i need the wire colors to the maf/iat so i can install a gforce chip havent a clue sorry.. contact dealer service for this..
...to check a 2009 chev cobolt MAF/IAT 5 wire sensor and what should i get for my reading for the 5 wires/ what color are the two wires for the maf/iat sensor in a 5 wire plug on a 2008 cobalt LS
...colors belong to the IAT sensor Color wires? The IAT sensor is part of the mass air flow sensor. The wires in the MAF harness that go to the IAT sensor are: Brown is ground, Red/Purple is the 5v ...
...Wire Colors in MAF Sensor The IAT is part of the MAF sensor which has 5 wires. I need to know what color wires are the IAT and should be 2 wires. If you are installing a so called "chip" don't do ...
I need to know what colors are the two wires that lead to the MAF/IAT sensor from the IAT/MAF sensor need vehicle info
1,117 questions posted
Usually answered in minutes!
454 Questions
386 Questions
293 Questions
74 Questions
48 Questions