Dacor ECS130 Epicure Electric Single Oven "heating element solder" Questions

...solder.  Works fine now.  WHY THE SLOW HEAT:  All elements go on for preheat and then when the Beep sounds just the element you selected as bake or convection maintains the heat. ...

...The lower element no longer heats up but the element appears to be fine. did you test it? could be bad. may be relay board, burned/broken wire, safety thermo or a bad solder connection on the

heating lower oven makes all the right sounds, just no heat on either the upper or lower element in all modes. Is there a thermal fuse or something that can go out? I have a DACOR double electric oven

...element and pulled it out. Do the wires come off the connector or do I have to rewire the replacement I am going to buy. They do not come off by finger pulling, but I don't want to force the matter. ...

...heating element they must be crimped on solder melts when it gets hot and the solder will melt and come off of the connections. I believe once you get proper spade connectors with no insulation on ...

heating. It is just the bottom bake element. I tried to replace the element but it is still not working. I can hear the relay clicking but it will not get above 100 degrees and the bottom element does

...heating elements will heat up seperately on other settings This is a DOP74081 pyro single oven, 2007 manufacture My oven is DOP705X. It had the same problem on two occasions. First time it was simply ...

...heating element (broil or bake) is working. Other controls and microwave work fine. In my case the problem was the solder around the pins of the DLB relay heated up and melted away from the pin. I ...

...heating element on the top are functioning correctly. when I setup a temperature like 350F, this temperature cannot be reached ( I can hear the tic tic of the panel control but nothing happens). The ...

element.!!! (2 legs of 110-120 VAC) Does your broil function work.? Convection.? or did "bake" flake out.? the relay boards are not very robust in these ovens, and manufactured as cheaply as possible.