...then stops heating. Usually problem like this with electrical solenoids located on the top of gas valve inside the dryer. They need to be
stopped heating today. The drum still turns, though. I checked the vent to see if it was clogged but it wasn't. Is it just old and needs replacing or is it fixable? Try replacing the valve coils first
replaced the cycling thermostat, hi limit thermostat, thermal fuse on blower housing, and temp control thermistor. None of that worked? What else could it be? Thank you. Q - My gas dryer will not heat
...replaced the two stats on the element You need to replace the 2 solenoid coils on the burner valve . When one of them gets hot from electricity going thru it , it opens ( shorts internally ) . After ...
...replaced the ignitor. Does not heat again, even though it warmed up briefly after the repairman completed the job. What else could the problem be? Hello- Have him come back out (AT NO CHARGE) and ...
...heat, check these: Igniter Gas valve coils Thermal fuse Igniter Modern gas dryers use an electric igniter to ignite the gas from the gas valve. When it's working properly, the igniter glows bright ...
...heat up when it is turned on and then stops heating while running. This is usually due to the two gas valve solenoid coils sitting on top of the gas valves, one with 3 prongs and the other has 2. The ...
...valve to provide heat and safety. The gas valve coils are the usual suspect when it comes to a "No Heat" complaint. I have provided a checklist from www.repairclinic.com, for your convenience. They ...
...a working part and the buzzing has stopped. Hope this helps. Amazon com Samsung Dryer Gas Valve DC62 00201A Home Improvement ...
...up. Any other suggestions? If you replaced the heating element and still the dryer is not getting hot, then you need to check your gas valve, and pilot to make sure that they are working
211 questions posted
Usually answered in minutes!
1,123 Questions
940 Questions
790 Questions
215 Questions